Hitachi C10RA2 Parts
22 Compatible Accessories Available!
Enhance your Hitachi C10RA2 with our range of accessories
Drawings
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 318-086 | Blade Guard Ass'y | £0.00 |
|
| 2 | 314-474 | Nut Chuck M6 | £0.00 |
|
| 3 | 314-479 | Blade Guard | £17.06 |
|
| 5 | 949-644 | Bolt M6x40 (10 Pcs.) | £2.79 |
|
| 6 | 314-477 | Arm | £8.73 |
|
| 7 | 314-478 | Rivet | £0.00 |
|
| 8 | 318-088 | Bolt M6x110 | £0.00 |
|
| 10 | 949-432 | Bolt Washer M6 (10 Pcs.) | £1.00 |
|
| 11 | 318-089 | Bolt M6x90 | £0.00 |
|
| 12 | 314-483 | Guard Bracket | £0.00 |
|
| 14 | 318-090 | Cushion | £0.00 |
|
| 15 | 314-480 | Bushing | £0.00 |
|
| 16 | 949-613 | Bolt M6x16 (10 Pcs.) | £1.00 |
|
| 19 | 314-476 | Self-locking Ring | £0.00 |
|
| 20 | 314-444 | Kick Back Pawl | £0.00 |
|
| 21 | 314-445 | Bushing | £0.00 |
|
| 22 | 949-870 | Roll Pin D4x22 (10 Pcs.) | £0.00 |
|
| 23 | 314-447 | Spring | £0.00 |
|
| 24 | 318-092 | Spreader | £0.00 |
|
| 25 | 314-446 | Roll Pin | £0.00 |
|
| 26 | 318-093 | Rip Fence Ass'y | £0.00 |
|
| 27 | 318-094 | Tapping Screw D5x25 | £0.00 |
|
| 28 | 318-535 | Compression Spring 12l | £0.00 |
|
| 29 | 318-095 | Rear Clamp | £0.00 |
|
| 31 | 318-097 | Slider (rear) | £0.00 |
|
| 33 | 318-133 | Pan Hd. Screw M5x25 | £0.00 |
|
| 34 | 318-100 | Counter Hd. Screw M4x20 | £0.00 |
|
| 35 | 318-101 | Support | £0.00 |
|
| 36 | 318-536 | Compression Spring 45l | £0.00 |
|
| 39 | 318-104 | Connecting Bar | £0.00 |
|
| 40 | 949-755 | Hex. Socket Hd. Bolt M6x16 (10 Pcs.) | £3.36 |
|
| 41 | 317-627 | Flat Washer 1/4"x5/8" | £0.00 |
|
| 42 | 318-105 | Parallel Bracket | £0.00 |
|
| 43 | 317-567 | Round Washer Hd. Screw M5x8 | £0.00 |
|
| 44 | 318-106 | Needle Pointer | £0.00 |
|
| 45 | 318-107 | Counter Hd. Screw M4x12 | £0.00 |
|
| 46 | 318-108 | Width Body | £0.00 |
|
| 47 | 318-537 | Screw M5x10 | £0.00 |
|
| 49 | 318-096 | Spring Pin | £0.00 |
|
| 50 | 318-111 | Slider (front) | £0.00 |
|
| 51 | 318-098 | Hex. Nut M4 | £0.00 |
|
| 52 | 318-113 | Front Clamper | £0.00 |
|
| 53 | 318-114 | Rubber Pin | £0.00 |
|
| 54 | 318-115 | Eccentric Shaft | £0.00 |
|
| 56 | 318-116 | Clamp Bolt | £0.00 |
|
| 57 | 318-117 | Grip | £0.00 |
|
| 58 | 314-484 | Table Insert For Saw Blade | £0.00 |
|
| 60 | 949-342 | Flat Hd. Screw M6x25 (10 Pcs.) | £1.91 |
|
| 61 | 314-486 | Seal Lock Screw M6x20 | £1.92 |
|
| 62 | 318-118 | Hex. Bolt (w/washers) M6x20 | £0.00 |
|
| 63 | 318-119 | Extension Wing (left) | £0.00 |
|
| 66 | 314-490 | Seal Lock Screw M6x10 | £1.92 |
|
| 67 | 318-122 | Table | £0.00 |
|
| 68 | 318-123 | Rail | £0.00 |
|
| 69 | 318-124 | Side Cover (right) | £0.00 |
|
| 71 | 318-126 | Extension Wing (right) | £0.00 |
|
| 72 | 318-127 | Side Cover (left) | £0.00 |
|
| 73 | 318-128 | Hex. Socket Hd. Cap Bolt M6x35 | £0.00 |
|
| 74 | 314-512 | Bevel Gear (a) | £7.33 |
|
| 75 | 314-513 | Slide Plate | £5.50 |
|
| 76 | 314-514 | Slide Bracket | £25.84 |
|
| 78 | 949-803 | Bolt M6x35 (10 Pcs.) | £2.28 |
|
| 79 | 315-042 | Miter Gauge Ass'y | £16.88 |
|
| 80 | 314-505 | Clamp Handle (b) | £5.61 |
|
| 81 | 314-506 | Flat Washer M6.4 | £1.92 |
|
| 82 | 314-507 | Miter Gauge | £10.38 |
|
| 83 | 949-234 | Machine Screw M5x6 (10 Pcs.) | £1.00 |
|
| 84 | 314-509 | Angle Pointer | £1.92 |
|
| 85 | 314-510 | Pin | £1.92 |
|
| 86 | 314-511 | Sheet Bar | £14.88 |
|
| 88 | 314-516 | Flat Washer M8x14.3 | £1.92 |
|
| 89 | 314-517 | Bevel Gear (b) | £7.33 |
|
| 90 | 314-518 | Screw Bar | £12.03 |
|
| 91 | 314-519 | Nut Chuck M8 | £1.92 |
|
| 92 | 314-520 | Body | £0.00 |
|
| 93 | 314-521 | Flat Washer M6.4x12.7 | £1.92 |
|
| 94 | 314-522 | Special Nut Chuck M6 | £1.00 |
|
| 95 | 314-523 | Guard | £7.33 |
|
| 98 | 314-454 | Washer (a) | £10.74 |
|
| 99 | 318-130 | Set Nut | £0.00 |
|
| 100 | 317-352 | Tapping Screw D5x10 | £0.00 |
|
| 101 | 314-526 | Blade Guard | £14.62 |
|
| 102 | 314-527 | Flat Washer M8x15 | £1.92 |
|
| 103 | 314-528 | Pivot Support | £15.46 |
|
| 106 | 967-469 | Hex. Socket Set Screw M6x6 | £1.00 |
|
| 107 | 314-533 | Anchor Block | £5.35 |
|
| 109 | 307-410 | Bolt (w/washers) M8x16 (black) | £1.00 |
|
| 110 | 314-529 | Special Bolt M6x35 | £1.00 |
|
| 111 | 949-455 | Spring Washer M6 (10 Pcs.) | £1.00 |
|
| 112 | 949-255 | Machine Screw M6x12 (10 Pcs.) | £1.00 |
|
| 113 | 314-530 | Bracket | £14.90 |
|
| 114 | 314-531 | Spacer | £1.92 |
|
| 115 | 949-556 | Nut M6 (10 Pcs.) | £1.00 |
|
| 116 | 314-535 | Compression Spring 20l | £1.92 |
|
| 117 | 314-536 | Flat Washer M16 | £0.00 |
Not Available
|
| 118 | 314-537 | Compression Spring 57l | £1.92 |
|
| 119 | 314-538 | Regulating Bolt | £5.61 |
|
| 120 | 949-518 | Roll Pin D3x18 (10 Pcs.) | £1.97 |
|
| 121 | 973-361 | Washer | £1.00 |
|
| 122 | 996-577 | Bolt (w/washers) M6x12 (black) | £1.00 |
|
| 123 | 314-539 | Body Shell | £0.00 |
|
| 127 | 314-555 | Segment Gear | £7.33 |
|
| 129 | 314-532 | Flat Washer M6x25 | £1.00 |
|
| 130 | 314-556 | Tension Handle | £8.12 |
|
| 131 | 314-557 | Wheel | £8.07 |
|
| 132 | 314-558 | Handle | £3.86 |
|
| 133 | 314-534 | Flat Washer M9.5 | £1.92 |
|
| 134 | 314-560 | Label | £2.03 |
|
| 135 | 318-131 | Pan Hd. Tapping Screw D4x12 | £0.00 |
|
| 136 | 314-561 | Pointer Bracket | £2.03 |
|
| 137 | 949-433 | Bolt Washer M8 (10 Pcs.) | £1.00 |
|
| 139 | 314-562 | Needle Pointer | £2.03 |
|
| 141 | 949-235 | Machine Screw M5x8 (10 Pcs.) | £1.00 |
|
| 142 | 314-541 | Extension Supporter (l) | £10.38 |
|
| 143 | 314-542 | Sponge | £2.03 |
|
| 144 | 314-548 | Strain Relief (ra-1418) | £0.00 |
|
| 146 | 314-540 | Set Plate | £5.61 |
|
| 147 | 317-285 | Switch Box | £0.00 |
|
| 149 | 949-429 | Bolt Washer M4 (10 Pcs.) | £1.00 |
|
| 150 | 314-545 | Tapping Screw D4x10 | £2.03 |
|
| 151 | 314-456 | Power Cable | £0.00 |
|
| 152 | 314-457 | Circuit Breaker Switch | £0.00 |
|
| 153 | 308-946 | Bolt (w/washers) M8x20 (black) | £1.00 |
|
| 154 | 314-547 | Extension Supporter (r) | £10.38 |
|
| 155 | 314-549 | Tapping Screw D5x16 | £2.03 |
|
| 156 | 318-132 | Pan Hd. Tapping Screw D4x8 | £0.00 |
|
| 157 | 314-553 | Toothed Lock Washer M4 | £2.03 |
|
| 158 | 314-458 | Switch Plate | £0.00 |
|
| 159 | 314-459 | Rocker Switch | £0.00 |
|
| 159 | 321-620 | Rocker Switch Ass'y | £0.00 |
|
| 160 | 317-158 | Internal Wire | £2.43 |
|
| 161 | 318-274 | Rubber Wheel | £0.00 |
|
| 162 | 318-538 | Spring Pin D4.3x20 | £0.00 |
|
| 163 | 318-539 | Spring Pin D3.3x19 | £0.00 |
|
| 164 | 319-000 | Scale | £0.00 |
|
| 165 | 321-617 | Power Cable Holder | £0.00 |
|
| 166 | 321-618 | Bolt M4x12 | £0.00 |
|
| 167 | 321-619 | Nut Chuck M4 | £0.00 |
|
| 168 | 321-621 | Safety Key | £0.00 |
|
| 201A | 324-508 | Spindle Ass'y | £34.64 |
|
| 202 | 314-567 | Parallel Key | £1.94 |
|
| 203 | 949-217 | Machine Screw M4x12 (10 Pcs.) | £1.00 |
|
| 204 | 949-453 | Spring Washer M4 (10 Pcs.) | £1.00 |
|
| 205 | 314-572 | Bearing Retainer | £2.03 |
|
| 206 | 620-4VV | Ball Bearing 6204vvcmps2l | £8.59 |
|
| 207 | 314-568 | Collar For D17 Hole | £2.03 |
|
| 208 | 314-569 | Helix Gear | £25.84 |
|
| 209 | 967-261 | Retaining Ring For D17 Shaft | £1.00 |
|
| 210 | 314-570 | Needle Bearing | £15.42 |
|
| 211A | 324-507 | Bracket Ass'y | £0.00 |
|
| 212A | 314-452 | Armature Ass'y 115v | £102.35 |
|
| 213 | 620-1VV | Ball Bearing 6201vvcmps2l | £7.42 |
|
| 214A | 620-0DD | Ball Bearing 6200ddcmps2l | £7.44 |
|
| 215 | 314-578 | Baffle | £8.35 |
|
| 216 | 314-579 | Tapping Screw D5x60 | £2.03 |
|
| 217 | 314-580 | Toothed Lock Washer M5 | £2.03 |
|
| 218 | 314-453 | Stator 115v | £31.13 |
|
| 219 | 314-577 | Bearing Bushing | £3.47 |
|
| 220 | 314-583 | Brush Cap | £5.61 |
|
| 221 | 999-044 | Carbon Brush (1 Pair) | £4.06 |
|
| 222 | 314-585 | Housing Ass'y | £75.79 |
|
| 223 | 314-586 | Brush Holder | £13.16 |
|
| 224 | 949-454 | Spring Washer M5 (10 Pcs.) | £1.00 |
|
| 225 | 949-245 | Machine Screw M5x30 (10 Pcs.) | £1.91 |
|
| 226 | 967-377 | Hex. Socket Set Screw M5x8 | £1.00 |
|
| 227 | 314-544 | Strain Relief (ru-1435) | £2.80 |
|
| 701 | 314-590 | Wrench 22mm | £9.53 |
|
| 702 | 314-591 | Wrench 23/26mm | £6.31 |
|
| 703 | 314-592 | Elbow | £4.21 |
|
| 704 | 314-616 | Tct Saw Blade 255mm-d15.88 Hole-nt36 | £0.00 |
|
| 705 | 314-819 | Stand Ass'y | £130.39 |
|
| 705 | 321-531 | Folding Stand | £5.43 |
|
| 706 | 318-820 | Special Bolt M8x16 | £3.58 |
|
| 707 | 317-603 | Washer | £1.00 |
|
| 708 | 949-558 | Nut M8 (10 Pcs.) | £1.00 |
|
| 709 | 318-821 | Rubber Leg | £12.49 |
|
| 710 | 949-560 | Nut M10 (10 Pcs.) | £2.79 |
|
| 901 | 314-325 | Table Insert For Cutter | £0.00 |
|
| 902 | 314-324 | Push Stick | £12.46 |
|
Accessories for Hitachi C10RA2
Circular Saw Blade - LU2C 1200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Cross Cutting blade with alternative bevel teeth. Excellent finish on hard woods up to 60mmans single sided laminates uptp 40mm.
View full description →
Price: £64.02
Circular Saw Blade - LU3D 0400
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Triple Chip saw blade for cutting laminated panels, chipboard and plywood upto 30mm.
View full description →
Price: £63.24
Circular Saw Blade - LU3A 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
View full description →
Price: £62.46
Circular Saw Blade - LU3E 0200
Circular Saw Blade for DeWalt DW1251 Radial Arm Saw Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Triple chip blade with Perma Shield coated body for cutting double faced laminate chipboard without chipping.
View full description →
Price: £48.99
Circular Saw Blade - LP60M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Alternate bevel toothed blade for long grain and cross cutting of solid wood
View full description →
Price: £47.47
Circular Saw Blade - LP80M 001
Circular Saw Blade for DeWalt DW702 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip toothed blade for aluminium and non ferrous metals. Work piece must be clamped dring cutting
View full description →
Price: £49.00
Circular Saw Blade - LU1I 0400
Circular Saw Blade for DeWalt DW702 Circular Saw 96 t.c. teeth 250mm x 3.0mm x 30mm Alternate bevel toothed blade for Cross Cutting of picture frames coated with delicate and abrasive materials even at 45 deg. A special blade with a Perma Shield coat
View full description →
Price: £72.73
Circular Saw Blade - LP20M 025
Circular Saw Blade for ELU DW744 Circular Saw 80 t.c. teeth 250mm x 3.2mm x 30mm Alternative bevel saw blade for cutting double sided laminated panels. Laser cut for low noise. Not suitable to cut plywood.
View full description →
Price: £24.10
Circular Saw Blade - LU2A 1700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 3.2mm x 30mm Alternate bevelled tooth industrial blade for ripping soft and hardwoods upto 60mmgiving a medium finish.will cut 60-100mmon single or multiple chipboard panels.
View full description →
Price: £56.46
Circular Saw Blade - LU1H 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 40 t.c. teeth 250mm x 2.7mm x 30mm Alternate bevelled tooth industrial blade for Alternate bevel toothed blade for ripping and cross cutting solid wood upto 40mm and 45mm respectively in softwoods and hardwoods. Maximum cut of 40mm in composites. Will give a good finish. Thin kerf requires less HP.
View full description →
Price: £37.21
Circular Saw Blade - LU2B 0500
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial quality alternative bevel saw blade for cross and rip cutting of hard and softwoods upto 50mm , or multiple chipboard upto 60mm with good finish.
View full description →
Price: £38.79
Circular Saw Blade - LU2B 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 3.2mm x 30mm Industrial fine finsh blade with alternate bevel teeth. Will cross cut soft, hardwoods and chipboard upto 60mm with an excellent finish.
View full description →
Price: £51.32
Circular Saw Blade - LU2D 0700
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.5mm x 30mm Thin kerf indust. Blade, alternate bevel tooth. Excellent finish when cutting hardwoods upto 55mm, 1 sided laminate panels to 40mm. Medium finish when cutting formica sheets and pvc upto 10mm. Thin kerf less power used.
View full description →
Price: £62.46
Circular Saw Blade - LU3B 0200
Circular Saw Blade for DeWalt DW744 Circular Saw 48 t.c. teeth 250mm x 3.2mm x 30mm Industrial triple chip tooth saw blade for cutting laminated panels.Leaves an excellent finish and features noise reduction slots.
View full description →
Price: £58.62
Circular Saw Blade - LU5D 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 3.5mm x 30mm Industrial triple chip tooth saw blade for cutting non ferrous metals with a wall thickness yp tp 3mm.This blade comes with 2 pin holes 11mm dia. At PCD 63mm.
View full description →
Price: £59.01
Circular Saw Blade - LU4A 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 80 t.c. teeth 250mm x 2.8mm x 30mm Triple chip saw blade for cutting plastic materials and plexiglas. The blade is designed with a negative hook angle and special grade carbide to give a perfect finish without melting or scratching. The blade must work30mm above the materila cut.
View full description →
Price: £62.09
Circular Saw Blade - LU1H 0800
Circular Saw Blade for DeWalt DW744 Circular Saw 60 t.c. teeth 250mm x 2.8mm x 30mm Thin kerf indust. blade giving an excellent finish cross cutting hard and soft woods up to 70mm. Max cutting thickness for ripping40mm..Also used for single or multiple chipboard panels.
View full description →
Price: £49.33
Circular Saw Blade - LU2C 1300
Circular Saw Blade for DeWalt DW744 Circular Saw 100 t.c. teeth 250mm x 3.2mm x 30mm Thin kerf indust. Blade, alternate bevel blade giving an excellent finish cross cutting hardwoods up to 30mm and for sizing chipboard, plywood and 1 sided laminate panels.
View full description →
Price: £58.05
Circular Saw Blade - LU1C 0100
Circular Saw Blade for DeWalt DW744 Circular Saw 24 t.c. teeth 250mm x 2.6mm x 30mm Industrial alternative bevel saw blade with Perma Shield and anti kick back teeth for ripping soft and hardwoods with loose knots.
View full description →
Price: £31.54
Circular Saw Blade for ELU TGS173 Circular Saw 40 t.c. teeth 250mm x 2.8mm x 30mm Combination rip and cross cut saw blade with alternate bevelled teeth for solid wood. Contract quality
View full description →
Price: £19.45
Circular Saw Blade for ELU TGS173 Circular Saw 24 t.c. teeth 250mm x 2.8mm x 30mm A contract quality alternate bevel toothed ripping blade for cutting solid wood down the grain
View full description →
Price: £16.29
Circular Saw Blade for ELU TGS173 Circular Saw 60 t.c. teeth 250mm x 2.8mm x 30mm Alternate bevel toothed blade for long grain and cross cutting of solid wood. Contract quality.
View full description →
Price: £23.35
This model also has 22 accessories available.
Scroll down to view them.