Home Manufacturers Skil Routers 1835U1 F 015 183 5R1

Skil 1835U1 Parts (F 015 183 5R1)

39 Compatible Accessories Available!

Enhance your Skil F 015 183 5R1 with our range of accessories

1 2610992421

Housing

£11.64

2 2610353384

Field

£19.05

3 2610353356

Armature

£39.49 Not Available

4 2610996689

Switch

£0.00

5 2610383569

Power Supply Cord

£9.91

5 2610376418

Power Supply Cord

£5.79 Not Available

6 2610313327

Grommet

£2.00 Not Available

7 2610364033

Cable Clip

£2.33

12 2610353436

Protection

£5.15

13 1619P01511

Ball Bearing

£4.78

14 2610042699

Deep-groove Ball Bearing

£8.73

16 2610341257

Brush Holder

£1.67 Not Available

17 2610353407

Spring

£1.00

19 2610318720

Screw

£1.00

22 2610353378

Support

£1.90

23 2610353424

Chuck

£11.37 Not Available

24 2610353374

Nut

£3.99

25 2610353415

Toolholder

£9.45 Not Available

26 2610353428

Terminal

£1.00

27 2610350655

Rubber Buffer

£1.00

28 2610355149

Sticker

£0.00

34 2610992422

Cover

£0.00

37 2610353370

Base Plate

£4.01

38 2610353434

Lever

£0.00

39 2610353395

Plate

£3.03

41 2610353433

Bolt

£1.00

42 2610353381

Key

£4.01 Not Available

43 2610353421

Rotary Head

£5.91

45 2610353425

Plate

£3.03

46 2610353376

Spring

£1.00

47 2610353380

Spring

£1.00

50 2610350998

Ball

£1.00 Not Available

51 2610353427

Spring

£0.00

52 2610353379

Spring

£1.00

54 2610353371

Plate

£2.51

56 2610353373

Knob

£2.00 Not Available

58 2610038795

Wire

£1.90

59 2610039553

Wire

£1.90

60 2610347103

Screw

£2.05

61 2610315386

Screw

£1.00

64 2610350943

Screw

£1.00

65 1619X00504

Screw

£1.00

68 2610039545

Wire

£1.90

70 2610001309

Nut

£1.00

71 2610353386

Nut

£1.00 Not Available

72 2610011489

Nut

£1.00

75 2610350698

Screw

£1.00

76 2610067431

Ring

£1.00

77 2610991280

Pan Head Screw

£1.00

79 2615298025

Tapping Screw

£1.00

80 2610911048

Tolerance Ring

£2.33

82 2610353399

Cover

£1.90

83 2610353423

Support

£0.00

84 2610353447

Switch Cover

£0.00

85 2610353412

Bearing

£1.90

88 2610909592

Spacer

£0.00

91 2610353431

Base

£0.00 Not Available

651/3 2610353372

Screw

£1.00

651/4 2610091803

Insert

£7.01

651/2 2610309249

Screw

£1.00

810 2610992427

Carbon-brush Set

£7.80

821 2610354662

Bearing Housing

£13.34

829 2610354385

Plate

£37.23

Ref	Part Number	Description	Price
1	2610992421	Housing	£11.64
2	2610353384	Field	£19.05
3	2610353356	Armature	£39.49	Not Available
4	2610996689	Switch	£0.00	Contact Us
5	2610383569	Power Supply Cord	£9.91
5	2610376418	Power Supply Cord	£5.79	Not Available
6	2610313327	Grommet	£2.00	Not Available
7	2610364033	Cable Clip	£2.33
12	2610353436	Protection	£5.15
13	1619P01511	Ball Bearing	£4.78
14	2610042699	Deep-groove Ball Bearing	£8.73
16	2610341257	Brush Holder	£1.67	Not Available
17	2610353407	Spring	£1.00
19	2610318720	Screw	£1.00
22	2610353378	Support	£1.90
23	2610353424	Chuck	£11.37	Not Available
24	2610353374	Nut	£3.99
25	2610353415	Toolholder	£9.45	Not Available
26	2610353428	Terminal	£1.00
27	2610350655	Rubber Buffer	£1.00
28	2610355149	Sticker	£0.00	Contact Us
34	2610992422	Cover	£0.00	Contact Us
37	2610353370	Base Plate	£4.01
38	2610353434	Lever	£0.00	Contact Us
39	2610353395	Plate	£3.03
41	2610353433	Bolt	£1.00
42	2610353381	Key	£4.01	Not Available
43	2610353421	Rotary Head	£5.91
45	2610353425	Plate	£3.03
46	2610353376	Spring	£1.00
47	2610353380	Spring	£1.00
50	2610350998	Ball	£1.00	Not Available
51	2610353427	Spring	£0.00	Contact Us
52	2610353379	Spring	£1.00
54	2610353371	Plate	£2.51
56	2610353373	Knob	£2.00	Not Available
58	2610038795	Wire	£1.90
59	2610039553	Wire	£1.90
60	2610347103	Screw	£2.05
61	2610315386	Screw	£1.00
64	2610350943	Screw	£1.00
65	1619X00504	Screw	£1.00
68	2610039545	Wire	£1.90
70	2610001309	Nut	£1.00
71	2610353386	Nut	£1.00	Not Available
72	2610011489	Nut	£1.00
75	2610350698	Screw	£1.00
76	2610067431	Ring	£1.00
77	2610991280	Pan Head Screw	£1.00
79	2615298025	Tapping Screw	£1.00
80	2610911048	Tolerance Ring	£2.33
82	2610353399	Cover	£1.90
83	2610353423	Support	£0.00	Contact Us
84	2610353447	Switch Cover	£0.00	Contact Us
85	2610353412	Bearing	£1.90
88	2610909592	Spacer	£0.00	Contact Us
91	2610353431	Base	£0.00	Not Available
651/3	2610353372	Screw	£1.00
651/4	2610091803	Insert	£7.01
651/2	2610309249	Screw	£1.00
810	2610992427	Carbon-brush Set	£7.80
821	2610354662	Bearing Housing	£13.34
829	2610354385	Plate	£37.23

Accessories for Skil F 015 183 5R1

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 39 accessories available.

Scroll down to view them.

View both spares and accessories