Makita BTD134 Parts
1 Compatible Accessory Available!
Enhance your Makita BTD134 with our range of accessories
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| 1 | 187114-3 | HOUSING SET | £13.70 |
|
| 2 | 896205-6 | BTD134 NAME PLATE | £1.00 |
|
| 3 | 266429-2 | TAPPING SCREW 3X16 TD126/DUM | £1.00 |
|
| 4 | 423423-9 | SPONGE B | £1.00 |
|
| 5 | 423422-1 | SPONGE A | £1.00 |
|
| 6 | 419041-9 | F/R CHANGE LEVER BTD043/063/1 | £1.00 |
|
| 7 | 650241-4 | SWITCH | £25.90 |
|
| 8 | 652045-0 | PANHD SCREW M3.5X5 BTD134/146 | £1.00 |
|
| 9 | 643854-8 | TERMINAL DUR141/DUM166/DFS441 | £3.70 |
|
| 10 | 231951-8 | RING SPRING 11 BTD/TD126/TL064 | £1.00 |
|
| 11 | 267085-1 | NARROW WASHER 12 TD126/DTD154 | £1.00 |
|
| 12 | 233005-7 | COMPRESSION SPRING 13 TD126 | £1.00 |
|
| 13 | 326072-0 | BIT SLEEVE BTD134/146/136/147 | £2.30 |
|
| 14 | 424429-0 | BUMPER | £2.40 |
|
| 15 | 452837-5 | HAMMER CASE COVER | £1.00 |
|
| 16 | 140946-9 | HAMMER CASE COMPLETE | £7.60 |
|
| 17 | 261151-6 | NYLON WASHER 19 BTD134/TD126 | £1.00 |
|
| 18 | 216001-0 | STEEL BALL 3.5 BPJ/DTD154/TL06 | £1.00 |
|
| 19 | 326071-2 | ANVIL M | £8.30 |
|
| 20 | 326054-2 | HAMMER | £13.70 |
|
| 21 | 216001-0 | STEEL BALL 3.5 BPJ/DTD154/TL06 | £1.00 |
|
| 22 | 267175-0 | FLAT WASHER 24 HR1840/HR1841F | £1.00 |
|
| 23 | 233430-2 | COMPRESSION SPRING 24 BTD134/ | £2.10 |
|
| 24 | 346466-3 | PLATE | £1.00 |
|
| 25 | 216011-7 | STEEL BALL 5.6/DTW285 | £1.00 |
|
| 26 | 227233-4 | SPUR GEAR 22 BTD134/136/132 | £2.50 |
|
| 27 | 326066-5 | SPINDLE | £10.20 |
|
| 28 | 256253-1 | PIN 5 BTD134LF10/TD126 | £1.00 |
|
| 29 | 253362-7 | THIN WASHER 12 | £1.00 |
|
| 30 | 227150-8 | INTERNAL GEAR 51 BTD134/136/1 | £3.20 |
|
| 31 | 211140-1 | BALL BEARING 6901LLB BTD134/1 | £5.00 |
|
| 32 | 213507-9 | O RING 40 BTD134/136/144/146/ | £3.10 |
|
| 33 | 158145-9 | BEARING BOX BTD134/136/132/14 | £11.60 |
|
| 34 | 638396-5 | YOKE UNIT BTD043/063/103 | £11.40 |
|
| 35 | 619244-7 | ARMATURE | £16.90 |
|
| 36 | 194427-5 | CARBON BRUSH CB-440 BTD043/06 | £3.10 |
|
| 37 | 638895-7 | BRUSH HOLDER COMPLETE | £3.80 |
|
| 38 | 263032-0 | RUBBER PIN 4 BTD043/063/103 | £1.00 |
|
| 39 | 452832-5 | REAR COVER | £2.10 |
|
| 40 | 266429-2 | TAPPING SCREW 3X16 TD126/DUM | £1.00 |
|
| 41 | 620051-3 | LIGHT CIRCUIT | £17.70 |
|
| 42 | 187114-3 | HOUSING SET | £13.70 |
|
| 44 | 424430-5 | SEAL | £1.00 |
|
| 45 | 140963-9 | SWITCH PLATE COMPLETE | £1.80 |
|
| 1001 | 266622-8 | TRUSS HEAD SCREW M4X12/BAP182 | £1.00 |
|
| 1002 | 346317-0 | Price on application | £2.36 |
|
| 1002 | 346449-3 | HOOK BTD134/146/BHP456 | £2.00 |
|
| 1003 | 450128-8 | BATTERY COVER BDG800/DTW251 | £1.00 |
|
| 1004 | ***DC18RC | 18V CHARGER | £17.79 |
|
| 1005 | 194065-3 | Price on application | £166.60 |
|
| 1006 | 821550-0 | STACKING CASE TYPE 2 157MM | £60.34 |
|
| 1006 | 824979-9 | PLASTIC CASE DTD156/DTP141 | £40.18 |
|
| 1007 | 837670-0 | MAKPAC TRAY TYPE 2 BTD/BTP/DTW DTD152/153 | £11.74 |
|
| 1007 | 893948-1 | BTD134RFE PLASTIC CASE LABEL | £0.00 |
|
| 1008 | 800P88-4 | BTD134RFJ INDICATION LABEL | £0.00 |
|
| 1008 | 800P92-3 | BTD134ZJ INDICATION LABEL | £0.00 |
|
| 1009 | 800P89-2 | BTD134RFJ PLASTIC CASE LABEL | £0.00 |
|
| 1009 | 800P93-1 | BTD134ZJ PLASTIC CASE LABEL | £0.00 |
|
Accessories for Makita BTD134
Cordless Carbon Brush Set - 194427-5 CB440
195021-6 supersedes older part numbers: 194427-5
Original Makita carbon brush set CB‑440 (part 195021‑6) — a direct replacement brush set for Makita brushed motors; replaces older Makita references such as 194427‑5 and 194159‑4.
What’s included and key dimensions: two carbon brushes per pack with braided copper wire leads and springs attached for an easy swap. Each brush measures approximately 3 × 10 × 13 mm (thickness × width × length). The brushes are graphite/carbon with brass terminal/lead construction.
Example models this CB‑440 set fits (common examples only): BDF452 / BDF451 / BDF440 series drills, BHP451 / BHP452 hammer drivers, BTD130 / BTD140 / BTD142 impact drivers, BTP140, BTW250 / BTW251 impact wrenches, DDF482 / DHP482 and DTW250 / DTW251 among many other Makita LXT 18 V brushed motor tools. (Check the brush size against your tool’s existing brushes to confirm fit.)
Why install this part: worn brushes cause poor performance, excessive sparking and can damage the commutator — replacing them with an original Makita CB‑440 carbon brushes restores motor contact and extends tool life. The set is ready to drop in where CB‑440 is specified.
(If your tool’s brush compartment or terminal style looks different, compare the 3 × 10 × 13 mm dimensions and the wire‑lead/spring arrangement to be sure this is the correct brush set for your model.)
Jump straight to the Makita spare parts diagrams:
- Makita BDF440 Parts
- Makita BDF451 Parts
- Makita BDF452 Parts
- Makita BHP451 Parts
- Makita BHP452 Parts
- Makita BTD140 Parts
- Makita BTD142 Parts
- Makita BTP140 Parts
- Makita BTW250 Parts
- Makita BTW251 Parts
- Makita DDF482 Parts
- Makita DHP482 Parts
- Makita DTW250 Parts
- Makita DTW251 Parts
Browse our full range of Makita drill parts. Makita impact driver parts. Makita impact wrench parts. Makita hammer drill parts.
This model also has 1 accessories available.
Scroll down to view them.