Home Manufacturers Makita Woodworking 3705

Makita 3705 Parts

40 Compatible Accessories Available!

Enhance your Makita 3705 with our range of accessories

1 692021-2

POWER SUPPLY CORD 1.0-2-2.5

£6.50

1 663926-3

POWER SUPPLY CORD 1.00-2-2.5

£8.50

2 410062-4

REAR COVER 3705

£5.00

3 645105-5

NOISE SUPPRESSOR/CONDENSOR 64

£3.00

3 645200-1

NOISE SUPPRESSOR

£3.00

4 682502-4

CORD GUARD 8-85 3707/N1923B

£1.00

5 265995-6

TAPPING SCREW 4X18

£1.00

5 265941-9

*TF SCREW 4X18 TRILBULAR

£1.00

6 687063-9

STRAIN RELIEF UH4570/55/5580/

£1.00

7 159270-9

'MOTOR REAR HOUSING 3705

£13.80

8 521564-6

*FIELD ASSY 240V 3705

£22.70

8 527072-5

'FIELD ASSY 110V 3705

£22.70

9 321518-1

'DRIVE SHAFT 3705

£18.20

10 211061-7

BALL BEARING 6000LLB BTW200

£6.30

10 211063-3

BALL BEARING 6000LBCM/2A

£7.60

11 257095-6

'RING 10 3705

£2.20

12 211064-1

BALL BEARING 6000 2414NB/LC12

£2.20

13 222088-2

'V-PULLEY 3-19 3705

£4.10

14 911200-6

PAN HD SCREW M4X70

£1.00

15 156942-7

'MOTOR HOUSING 3705

£19.90

16 211066-7

BALL BEARING 6200LLB

£4.50

17 263002-9

RUBBER PIN 4 GA7050/9050/5021

£1.00

18 191628-6

CARBON BRUSH CB-65

£4.10

19 643550-8

BRUSH HOLDER CAP CB-9-14-17/N

£1.00

21 651467-1

SWITCH STE206K

£13.10

22 911168-6

*PAN HD SCREW 4X40 W/CP

£1.00

23 854936-3

*NAME PLATE 3705

£1.00

25 263014-2

RUBBER PIN 4 SR2600/N1923BD/HR

£1.00

26 211028-5

BALL BEARING 627LB/HP1641/903

£8.00

27 681614-0

INSULATION WASHER 627/N1923BD

£1.00

28 511476-1

'ARMATURE 110V 3705

£52.10

28 511479-5

*ARMATURE 240V 3705

£52.10

29 241100-9

FAN 52 3705/906

£3.00

30 231930-6

'TORSION BAR 3705

£1.00

31 341946-4

'BELT COVER 3705

£1.00

32 265814-6

'HEX SOCKET HEAD BOLT M8 X 11

£1.90

33 911121-2

PAN HD SCREW M4X14 9BGA450/45

£1.00

34 410061-6

BASE PROTECTOR 3705

£6.10

35 915116-7

BINDING HD SCREW M4X12 DUM166

£1.00

36 915126-4

*BINDING HD SCREW M4X16

£1.00 Not Available

37 931403-6

HEX HALFNUT M8 VC3211M

£1.00

38 168139-6

BASE 3705

£39.80

39 941202-8

FLAT WASHER 8 DIN125-A RP0900

£1.00

40 922412-6

'HEX SOCKET HD BOLT M8 X 12 3

£1.00

41 763606-2

COLLET NUT 6 3700B/906/3707

£3.90

42 763608-8

COLLET CONE 6.35 3700B/3708F

£4.90

43 225041-7

POLY V-BELT 3-170 3705

£5.00

44 911131-9

PAN HD SCREW M4X18

£1.00

45 222087-4

'V-PULLEY 3-23 3705

£4.40

46 315618-7

'BEARING BOX 3705

£25.60

400 783204-6

Price on application

£2.36

401 122281-7

GUIDE HOLDER ASS'Y

£9.32

402 321912-7

TEMPLET GUIDE

£3.50

403 410047-0

WRENCH HOLDER 5.6 TM3000C

£1.00

404 781008-0

Price on application

£20.81

405 781003-0

Price on application

£3.30

406 341947-2

STRAIGHT GUIDE

£11.14

407 163162-6

TRIMMER GUIDE

£14.88

5001 654091-9

NON INSULATED TERMINAL GD0801

£1.00

5002 655030-2

Price on application

£8.34

Ref	Part Number	Description	Price
1	692021-2	POWER SUPPLY CORD 1.0-2-2.5	£6.50
1	663926-3	POWER SUPPLY CORD 1.00-2-2.5	£8.50
2	410062-4	REAR COVER 3705	£5.00
3	645105-5	NOISE SUPPRESSOR/CONDENSOR 64	£3.00
3	645200-1	NOISE SUPPRESSOR	£3.00
4	682502-4	CORD GUARD 8-85 3707/N1923B	£1.00
5	265995-6	TAPPING SCREW 4X18	£1.00
5	265941-9	*TF SCREW 4X18 TRILBULAR	£1.00
6	687063-9	STRAIN RELIEF UH4570/55/5580/	£1.00
7	159270-9	'MOTOR REAR HOUSING 3705	£13.80
8	521564-6	*FIELD ASSY 240V 3705	£22.70
8	527072-5	'FIELD ASSY 110V 3705	£22.70
9	321518-1	'DRIVE SHAFT 3705	£18.20
10	211061-7	BALL BEARING 6000LLB BTW200	£6.30
10	211063-3	BALL BEARING 6000LBCM/2A	£7.60
11	257095-6	'RING 10 3705	£2.20
12	211064-1	BALL BEARING 6000 2414NB/LC12	£2.20
13	222088-2	'V-PULLEY 3-19 3705	£4.10
14	911200-6	PAN HD SCREW M4X70	£1.00
15	156942-7	'MOTOR HOUSING 3705	£19.90
16	211066-7	BALL BEARING 6200LLB	£4.50
17	263002-9	RUBBER PIN 4 GA7050/9050/5021	£1.00
18	191628-6	CARBON BRUSH CB-65	£4.10
19	643550-8	BRUSH HOLDER CAP CB-9-14-17/N	£1.00
21	651467-1	SWITCH STE206K	£13.10
22	911168-6	*PAN HD SCREW 4X40 W/CP	£1.00
23	854936-3	*NAME PLATE 3705	£1.00
25	263014-2	RUBBER PIN 4 SR2600/N1923BD/HR	£1.00
26	211028-5	BALL BEARING 627LB/HP1641/903	£8.00
27	681614-0	INSULATION WASHER 627/N1923BD	£1.00
28	511476-1	'ARMATURE 110V 3705	£52.10
28	511479-5	*ARMATURE 240V 3705	£52.10
29	241100-9	FAN 52 3705/906	£3.00
30	231930-6	'TORSION BAR 3705	£1.00
31	341946-4	'BELT COVER 3705	£1.00
32	265814-6	'HEX SOCKET HEAD BOLT M8 X 11	£1.90
33	911121-2	PAN HD SCREW M4X14 9BGA450/45	£1.00
34	410061-6	BASE PROTECTOR 3705	£6.10
35	915116-7	BINDING HD SCREW M4X12 DUM166	£1.00
36	915126-4	*BINDING HD SCREW M4X16	£1.00	Not Available
37	931403-6	HEX HALFNUT M8 VC3211M	£1.00
38	168139-6	BASE 3705	£39.80
39	941202-8	FLAT WASHER 8 DIN125-A RP0900	£1.00
40	922412-6	'HEX SOCKET HD BOLT M8 X 12 3	£1.00
41	763606-2	COLLET NUT 6 3700B/906/3707	£3.90
42	763608-8	COLLET CONE 6.35 3700B/3708F	£4.90
43	225041-7	POLY V-BELT 3-170 3705	£5.00
44	911131-9	PAN HD SCREW M4X18	£1.00
45	222087-4	'V-PULLEY 3-23 3705	£4.40
46	315618-7	'BEARING BOX 3705	£25.60
400	783204-6	Price on application	£2.36
401	122281-7	GUIDE HOLDER ASS'Y	£9.32
402	321912-7	TEMPLET GUIDE	£3.50
403	410047-0	WRENCH HOLDER 5.6 TM3000C	£1.00
404	781008-0	Price on application	£20.81
405	781003-0	Price on application	£3.30
406	341947-2	STRAIGHT GUIDE	£11.14
407	163162-6	TRIMMER GUIDE	£14.88
5001	654091-9	NON INSULATED TERMINAL GD0801	£1.00
5002	655030-2	Price on application	£8.34

Accessories for Makita 3705

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Brush - 342003 (CB52)

Carbon brushes (PAIR) Other part no's 342004 CB53 CB85 CB72 09144 Dimensions 5x8x11.5.

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 40 accessories available.

Scroll down to view them.

View both spares and accessories