Home Manufacturers Bosch Routers Router POF 400 0 603 261 138

Bosch Router POF 400 Parts (0 603 261 138)

39 Compatible Accessories Available!

Enhance your Bosch 0 603 261 138 with our range of accessories

1 2605104994

Housing Section

£28.57

2 2604220446

Field

£15.05

2 2604220423

Field

£18.41 Not Available

3 2604010658

Armature

£43.16 Not Available

3 2604010766

Armature

£39.49

3/50 2606610027

Fan

£2.45

4 2607200199

Switch

£14.75 Not Available

5 1607000388

Power Supply Cord

£8.73

5 2604460135

Power Supply Cord

£13.34

6 2600703011

Grommet

£2.45

6 2600703012

Grommet

£2.33

7 2601035001

Cable Clip

£1.00

7 1611035005

Cable Clip

£2.05

9 2601110663

Sticker

£1.00

9 2601110867

Sticker

£0.00

12 2607329117

Suppression Capacitor

£2.51 Not Available

14 2600905017

Deep-groove Ball Bearing

£7.01

16 2604449026

Brush Holder

£1.00

18 2603410001

Socket Head Cap Screw

£1.00

22 2601015054

Brush Plate

£1.00 Not Available

25 1900210012

O-ring

£1.00

26 2916650006

Spring Retaining Ring

£1.00

27 2600300062

Bushing

£1.61 Not Available

28 2600500033

Cupped Washer

£2.33

29 2600108033

Felt Washer

£1.00

30 2608570005

Collet Chuck

£10.06

31 2603312006

Union Nut

£4.78

32 2603230000

Ball

£1.00 Not Available

33 2603320003

Square Nut

£1.00

34 1603481001

Handle

£9.28

35 2915011007

Hex Nut

£1.00

36 2604448082

Connecting Cable

£1.00

37 2604448083

Connecting Cable

£1.00

38 2605500083

Housing Cover

£2.00

45 2600101109

Plain Washer

£0.00

46 2910011191

Socket Head Cap Screw

£1.00 Not Available

47 2604617001

Compression Spring

£1.00 Not Available

48 2602316006

Depth-gauge

£1.00 Not Available

52 2603480003

Wing Screw

£2.33

54 2916011014

Plain Washer

£1.00

180 3601119137

Warning Plate

£3.03

654 2603101035

Straight Pin

£2.45

655 2607950511

Single-head Eng. Wrench

£3.36

656 2603102004

Guiding Bolt

£1.90 Not Available

657 2608005016

Edge Guide

£6.56 Not Available

659 2608040024

Clamping Piece

£1.00 Not Available

660 1610210043

O-ring

£1.00

661 2605730024

Suction Nozzle

£6.12 Not Available

662 2605730034

Protective Ring

£2.39 Not Available

663 1600306008

Hose Fitting

£0.00

808 1601106999

Nameplate

£2.51

810 2604321905

Carbon-brush Set

£7.76

821 2603239010

Rubber Plug

£1.00

823 2910611006

Tapping Screw

£2.29

824 2600420900

Bushing

£3.35 Not Available

840 2603490022

Torx Oval-head Screw

£1.00

842 2608000902

Base Plate

£26.13

Ref	Part Number	Description	Price
1	2605104994	Housing Section	£28.57
2	2604220446	Field	£15.05
2	2604220423	Field	£18.41	Not Available
3	2604010658	Armature	£43.16	Not Available
3	2604010766	Armature	£39.49
3/50	2606610027	Fan	£2.45
4	2607200199	Switch	£14.75	Not Available
5	1607000388	Power Supply Cord	£8.73
5	2604460135	Power Supply Cord	£13.34
6	2600703011	Grommet	£2.45
6	2600703012	Grommet	£2.33
7	2601035001	Cable Clip	£1.00
7	1611035005	Cable Clip	£2.05
9	2601110663	Sticker	£1.00
9	2601110867	Sticker	£0.00	Contact Us
12	2607329117	Suppression Capacitor	£2.51	Not Available
14	2600905017	Deep-groove Ball Bearing	£7.01
16	2604449026	Brush Holder	£1.00
18	2603410001	Socket Head Cap Screw	£1.00
22	2601015054	Brush Plate	£1.00	Not Available
25	1900210012	O-ring	£1.00
26	2916650006	Spring Retaining Ring	£1.00
27	2600300062	Bushing	£1.61	Not Available
28	2600500033	Cupped Washer	£2.33
29	2600108033	Felt Washer	£1.00
30	2608570005	Collet Chuck	£10.06
31	2603312006	Union Nut	£4.78
32	2603230000	Ball	£1.00	Not Available
33	2603320003	Square Nut	£1.00
34	1603481001	Handle	£9.28
35	2915011007	Hex Nut	£1.00
36	2604448082	Connecting Cable	£1.00
37	2604448083	Connecting Cable	£1.00
38	2605500083	Housing Cover	£2.00
45	2600101109	Plain Washer	£0.00	Contact Us
46	2910011191	Socket Head Cap Screw	£1.00	Not Available
47	2604617001	Compression Spring	£1.00	Not Available
48	2602316006	Depth-gauge	£1.00	Not Available
52	2603480003	Wing Screw	£2.33
54	2916011014	Plain Washer	£1.00
180	3601119137	Warning Plate	£3.03
654	2603101035	Straight Pin	£2.45
655	2607950511	Single-head Eng. Wrench	£3.36
656	2603102004	Guiding Bolt	£1.90	Not Available
657	2608005016	Edge Guide	£6.56	Not Available
659	2608040024	Clamping Piece	£1.00	Not Available
660	1610210043	O-ring	£1.00
661	2605730024	Suction Nozzle	£6.12	Not Available
662	2605730034	Protective Ring	£2.39	Not Available
663	1600306008	Hose Fitting	£0.00	Contact Us
808	1601106999	Nameplate	£2.51
810	2604321905	Carbon-brush Set	£7.76
821	2603239010	Rubber Plug	£1.00
823	2910611006	Tapping Screw	£2.29
824	2600420900	Bushing	£3.35	Not Available
840	2603490022	Torx Oval-head Screw	£1.00
842	2608000902	Base Plate	£26.13

Accessories for Bosch 0 603 261 138

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 39 accessories available.

Scroll down to view them.

View both spares and accessories