Home Manufacturers Bosch Routers Router GOF 2000 CE 0 601 619 750

Bosch Router GOF 2000 CE Parts (0 601 619 750)

45 Compatible Accessories Available!

Enhance your Bosch 0 601 619 750 with our range of accessories

1 2610996079

Motor Housing

£25.04

2 2610997006

Field

£41.83

3/14 2916650014

Spring Retaining Ring

£1.00

3 2610997007

Armature

£75.13 Not Available

5 2610997009

Power Supply Cord

£19.05

5 2610997018

Power Supply Cord

£14.83

6 3600707503

Grommet

£3.03

7 2601035001

Cable Clip

£1.00

8 2610907977

Nameplate

£2.51

8 2610907984

Nameplate

£2.51

9 2610998878

Warning Plate

£3.03

12 2610997184

Condenser

£6.12

13 1900905276

Deep-groove Ball Bearing

£0.00 Not Available

14 3600900526

Deep-groove Ball Bearing

£25.04

16 1604336008

Brush Holder

£15.05

18 2610904114

Screw

£0.00

20 2610998879

Nameplate

£3.03

21 1614652001

Spiral Spring

£3.03

22 2610996101

Connecting Cable

£2.33

23 2610996102

Bearing Sleeve

£2.78

27 2610996083

Housing Cover

£9.45

28 2610996148

Fan Housing

£63.47

30 2610996106

Handle

£13.34

31 2610996107

Handle

£13.34

35 2610996111

Base Plate

£7.42

36 2916011892

Plain Washer

£1.00

41 3600149500

Spring Retaining Ring

£2.33

42 2610931544

Retaining Snap Ring

£1.00

43 2610996118

Baffle

£5.30

44 2610996119

Lock Bolt

£3.36 Not Available

45 2610996120

Compression Spring

£3.03

47 1607233146

Speed Governor

£28.57 Not Available

48 2610923615

Bellows

£5.30

49 2610997139

Nut

£7.76

50 2610996125

Locking Bolt

£5.30

53 2610996128

Clamping Spring

£2.05

59 2610913476

Washer

£1.00

60 2600590006

Ratchet Cap

£1.00

61 3603231539

Knob

£1.00

62 2610996135

Locking Lever

£4.78

63 2610997010

Depth-gauge

£7.01

65 2610909058

Depth-gauge

£5.30

66 2610996137

Spring Washer

£2.51

67 1601030022

Tab Washer

£1.00

68 2610997003

Button

£3.36

69 2610996138

Spring Clip

£1.00

70 2610996139

Cover Plate

£2.33

73 2610997012

Indicator Ring

£3.36

74 2610991306

Tapping Screw

£1.00

75 2610907721

Sticker

£2.51

76 2603490021

Torx Oval-head Screw

£1.00

77 2610996142

Screw

£1.00

78 3603415560

Thread-forming Tap. Screw

£1.00

79 2610996143

Screw

£1.00

80 2610913441

Screw

£1.00

81 2610915161

Screw

£2.33 Not Available

84 2910951118

Oval-head Screw

£1.00

85 3603410504

Screw

£2.05

87 2610913573

O-ring

£1.00

88 2610997008

Washer

£1.00

89 2610997030

Terminal

£1.00

90 2610997031

Connecting Cable

£7.01

91 2610913825

Screw

£1.16

92 2610909072

Nut

£1.00

651 2610991370

Guide Sleeve

£25.04

652 2910871122

Countersunk-head Screw

£0.00 Not Available

653 2610992417

Single-head Eng. Wrench

£11.64

654 2610907529

Adjustment Knob

£3.36 Not Available

654/3 2610015629

Ring

£1.00 Not Available

724 2608570107

Collet

£41.72

724 2608570106

Collet

£0.00

724 2608570105

Collet

£0.00

724 2608570104

Collet

£26.10

724 2608570103

Collet

£0.00

724 2608570125

Collet

£0.00

804 2610997157

On-off Switch

£27.69

810 2610997152

Carbon-brush Set

£13.34

834 2610996147

Base Plate

£105.14

840 2610910606

Locking Device

£17.37 Not Available

852 2610997148

Locking Lever

£16.20 Not Available

854 2610910608

Fine-adjusting Device

£25.04

855 2610996149

Conversion Gear

£15.05

Ref	Part Number	Description	Price
1	2610996079	Motor Housing	£25.04
2	2610997006	Field	£41.83
3/14	2916650014	Spring Retaining Ring	£1.00
3	2610997007	Armature	£75.13	Not Available
5	2610997009	Power Supply Cord	£19.05
5	2610997018	Power Supply Cord	£14.83
6	3600707503	Grommet	£3.03
7	2601035001	Cable Clip	£1.00
8	2610907977	Nameplate	£2.51
8	2610907984	Nameplate	£2.51
9	2610998878	Warning Plate	£3.03
12	2610997184	Condenser	£6.12
13	1900905276	Deep-groove Ball Bearing	£0.00	Not Available
14	3600900526	Deep-groove Ball Bearing	£25.04
16	1604336008	Brush Holder	£15.05
18	2610904114	Screw	£0.00	Contact Us
20	2610998879	Nameplate	£3.03
21	1614652001	Spiral Spring	£3.03
22	2610996101	Connecting Cable	£2.33
23	2610996102	Bearing Sleeve	£2.78
27	2610996083	Housing Cover	£9.45
28	2610996148	Fan Housing	£63.47
30	2610996106	Handle	£13.34
31	2610996107	Handle	£13.34
35	2610996111	Base Plate	£7.42
36	2916011892	Plain Washer	£1.00
41	3600149500	Spring Retaining Ring	£2.33
42	2610931544	Retaining Snap Ring	£1.00
43	2610996118	Baffle	£5.30
44	2610996119	Lock Bolt	£3.36	Not Available
45	2610996120	Compression Spring	£3.03
47	1607233146	Speed Governor	£28.57	Not Available
48	2610923615	Bellows	£5.30
49	2610997139	Nut	£7.76
50	2610996125	Locking Bolt	£5.30
53	2610996128	Clamping Spring	£2.05
59	2610913476	Washer	£1.00
60	2600590006	Ratchet Cap	£1.00
61	3603231539	Knob	£1.00
62	2610996135	Locking Lever	£4.78
63	2610997010	Depth-gauge	£7.01
65	2610909058	Depth-gauge	£5.30
66	2610996137	Spring Washer	£2.51
67	1601030022	Tab Washer	£1.00
68	2610997003	Button	£3.36
69	2610996138	Spring Clip	£1.00
70	2610996139	Cover Plate	£2.33
73	2610997012	Indicator Ring	£3.36
74	2610991306	Tapping Screw	£1.00
75	2610907721	Sticker	£2.51
76	2603490021	Torx Oval-head Screw	£1.00
77	2610996142	Screw	£1.00
78	3603415560	Thread-forming Tap. Screw	£1.00
79	2610996143	Screw	£1.00
80	2610913441	Screw	£1.00
81	2610915161	Screw	£2.33	Not Available
84	2910951118	Oval-head Screw	£1.00
85	3603410504	Screw	£2.05
87	2610913573	O-ring	£1.00
88	2610997008	Washer	£1.00
89	2610997030	Terminal	£1.00
90	2610997031	Connecting Cable	£7.01
91	2610913825	Screw	£1.16
92	2610909072	Nut	£1.00
651	2610991370	Guide Sleeve	£25.04
652	2910871122	Countersunk-head Screw	£0.00	Not Available
653	2610992417	Single-head Eng. Wrench	£11.64
654	2610907529	Adjustment Knob	£3.36	Not Available
654/3	2610015629	Ring	£1.00	Not Available
724	2608570107	Collet	£41.72
724	2608570106	Collet	£0.00	Contact Us
724	2608570105	Collet	£0.00	Contact Us
724	2608570104	Collet	£26.10
724	2608570103	Collet	£0.00	Contact Us
724	2608570125	Collet	£0.00	Contact Us
804	2610997157	On-off Switch	£27.69
810	2610997152	Carbon-brush Set	£13.34
834	2610996147	Base Plate	£105.14
840	2610910606	Locking Device	£17.37	Not Available
852	2610997148	Locking Lever	£16.20	Not Available
854	2610910608	Fine-adjusting Device	£25.04
855	2610996149	Conversion Gear	£15.05

Accessories for Bosch 0 601 619 750

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

1/4" Collet and Nut Set - 2608570104

1/4" (6.35mm) collet appropriate for use in Bosch routers: GOF MF 1400 CE, GMF 1600 CE, GOF 1200, GOF 1200 A, GOF 1300 ACE, GOF 1300 CE, GOF 1600 CE, GOF 2000 CE professional.

View full description →

13mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200138

13mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.

View full description →

16mm Guide Bush / Template Guide (Quick Fastening Lock) - 2608000471

16mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.

View full description →

24mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200140

24mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.

View full description →

27mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200141

27mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.

View full description →

30mm Guide Bush / Template Guide (Quick Fastening Lock) - 2609200142

30mm guide bush/template guide suitable for use with Bosch DIY and professional routers: GKF 600; GMF 1400 CE; GMF 1600 CE; GOF 900; GOF 900 ACE; GOF 900 CE; GOF 1600 CE; GOF 2000 CE Professional; POF 800; POF 1100 AE; POF 1200 AE; POF 1300 ACE; POF 1400 ACE.

View full description →

This model also has 45 accessories available.

Scroll down to view them.

View both spares and accessories