Home Manufacturers Black & Decker Routers BD780 ROUTER ATTACH BD780 Type 1

Black & Decker BD780 ROUTER ATTACH Parts (BD780 Type 1)

41 Compatible Accessories Available!

Enhance your Black & Decker BD780 Type 1 with our range of accessories

1 868630-00

Not Available

£0.00

2 This part is unavailable

Notify Me

3 760952-00

SWITCH

£12.48

4 930760-00

BRUSH 230V *BK17*

£6.29

5 This part is unavailable

Notify Me

6 949835-01

PROTECTOR

£0.00 Not Available

7 930103-00

CORD CLAMP

£1.88

8 This part is unavailable

Notify Me

9 930029-00

HOLDER BEARING

£1.88

10 330003-34

BEARING

£24.50

11 930079-01

SCREW

£0.00 Not Available

12 930098-00

RETAINER

£1.88

15 944484-00

LOCKING RING

£0.00 Not Available

16 930746-00

Not Available

£0.00

17 930090-00

BRUSH SPRING

£1.88

18 930077-00

SCREW

£0.00 Not Available

19 943173-00

BAFFLE

£0.00 Not Available

20 933657-00

CAP

£0.00 Not Available

21 949877-01

CAPACITOR

£1.88

22 This part is unavailable

Notify Me

23 This part is unavailable

Notify Me

24 949801-11

Not Available

£0.00 Not Available

25 949801-10

Not Available

£0.00 Not Available

26 944856-00

HOUSING LOWER

£6.32 Not Available

27 This part is unavailable

Notify Me

28 944386-00

COVER

£0.00 Not Available

29 930251-01

SCREW.TEMP

£1.67

30 N406641

SPRING COMPRESSION

£1.88

33 943269-00

Not Available

£0.00 Not Available

34 943270-00

COLLET NUT

£6.29

35 945121-00

SCREW.TEMP

£1.88

36 This part is unavailable

Notify Me

37 This part is unavailable

Notify Me

38 This part is unavailable

Notify Me

39 This part is unavailable

Notify Me

40 This part is unavailable

Notify Me

41 326573-01

SCREW WING

£2.29

42 868082-00

SPRING

£1.88

43 This part is unavailable

Notify Me

44 This part is unavailable

Notify Me

45 This part is unavailable

Notify Me

46 This part is unavailable

Notify Me

47 This part is unavailable

Notify Me

50 949726-05

NUT

£1.88

51 896369

NUT

£1.98 Not Available

52 860083-14

NUT

£1.88

54 This part is unavailable

Notify Me

55 This part is unavailable

Notify Me

56 This part is unavailable

Notify Me

57 This part is unavailable

Notify Me

59 This part is unavailable

Notify Me

60 This part is unavailable

Notify Me

61 937883

WASHER

£1.67 Not Available

63 This part is unavailable

Notify Me

65 This part is unavailable

Notify Me

66 930244-00

NUT

£3.74

68 This part is unavailable

Notify Me

70 This part is unavailable

Notify Me

71 This part is unavailable

Notify Me

72 869076-00

SCREW

£1.88

73 This part is unavailable

Notify Me

74 This part is unavailable

Notify Me

75 This part is unavailable

Notify Me

76 This part is unavailable

Notify Me

77 This part is unavailable

Notify Me

78 This part is unavailable

Notify Me

79 This part is unavailable

Notify Me

80 This part is unavailable

Notify Me

81 This part is unavailable

Notify Me

82 930248-00

WASHER

£1.88

84 943269-01

COLLET 6.35MM

£19.45

85 943269-02

COLLET 8MM

£14.83

846 This part is unavailable

Notify Me

847 This part is unavailable

Notify Me

Ref	Part Number	Description	Price
1	868630-00	Not Available	£0.00	Contact Us
2	This part is unavailable Notify Me
3	760952-00	SWITCH	£12.48
4	930760-00	BRUSH 230V BK17	£6.29
5	This part is unavailable Notify Me
6	949835-01	PROTECTOR	£0.00	Not Available
7	930103-00	CORD CLAMP	£1.88
8	This part is unavailable Notify Me
9	930029-00	HOLDER BEARING	£1.88
10	330003-34	BEARING	£24.50
11	930079-01	SCREW	£0.00	Not Available
12	930098-00	RETAINER	£1.88
15	944484-00	LOCKING RING	£0.00	Not Available
16	930746-00	Not Available	£0.00	Contact Us
17	930090-00	BRUSH SPRING	£1.88
18	930077-00	SCREW	£0.00	Not Available
19	943173-00	BAFFLE	£0.00	Not Available
20	933657-00	CAP	£0.00	Not Available
21	949877-01	CAPACITOR	£1.88
22	This part is unavailable Notify Me
23	This part is unavailable Notify Me
24	949801-11	Not Available	£0.00	Not Available
25	949801-10	Not Available	£0.00	Not Available
26	944856-00	HOUSING LOWER	£6.32	Not Available
27	This part is unavailable Notify Me
28	944386-00	COVER	£0.00	Not Available
29	930251-01	SCREW.TEMP	£1.67
30	N406641	SPRING COMPRESSION	£1.88
33	943269-00	Not Available	£0.00	Not Available
34	943270-00	COLLET NUT	£6.29
35	945121-00	SCREW.TEMP	£1.88
36	This part is unavailable Notify Me
37	This part is unavailable Notify Me
38	This part is unavailable Notify Me
39	This part is unavailable Notify Me
40	This part is unavailable Notify Me
41	326573-01	SCREW WING	£2.29
42	868082-00	SPRING	£1.88
43	This part is unavailable Notify Me
44	This part is unavailable Notify Me
45	This part is unavailable Notify Me
46	This part is unavailable Notify Me
47	This part is unavailable Notify Me
50	949726-05	NUT	£1.88
51	896369	NUT	£1.98	Not Available
52	860083-14	NUT	£1.88
54	This part is unavailable Notify Me
55	This part is unavailable Notify Me
56	This part is unavailable Notify Me
57	This part is unavailable Notify Me
59	This part is unavailable Notify Me
60	This part is unavailable Notify Me
61	937883	WASHER	£1.67	Not Available
63	This part is unavailable Notify Me
65	This part is unavailable Notify Me
66	930244-00	NUT	£3.74
68	This part is unavailable Notify Me
70	This part is unavailable Notify Me
71	This part is unavailable Notify Me
72	869076-00	SCREW	£1.88
73	This part is unavailable Notify Me
74	This part is unavailable Notify Me
75	This part is unavailable Notify Me
76	This part is unavailable Notify Me
77	This part is unavailable Notify Me
78	This part is unavailable Notify Me
79	This part is unavailable Notify Me
80	This part is unavailable Notify Me
81	This part is unavailable Notify Me
82	930248-00	WASHER	£1.88
84	943269-01	COLLET 6.35MM	£19.45
85	943269-02	COLLET 8MM	£14.83
846	This part is unavailable Notify Me
847	This part is unavailable Notify Me

Accessories for Black & Decker BD780 Type 1

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Collet and nut set 1/4 DW620-621K - DE6951

Replacement collet. Fits the following machines:- Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW620, 621 Black & Decker SR100, BD780, 780E

D=8 mm d=1/4 inch Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW613, 614, 615, 620, 621 Black & Decker SR100, BD780, 780E Includes:

View full description →

Collet and nut 8mm Of97-Dw620-Dw621K - DE6952

Replacement collet. Fits the following machines:- Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW620, 621 Black & Decker SR100, BD780, 780E

D=8 mm d=8 mm Elu MKF67, MOF69, 96(E) OF97(E) DeWalt DW613, 614, 615, 620, 621 Black & Decker SR100, BD780, 780E Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 41 accessories available.

Scroll down to view them.

View both spares and accessories