Home Manufacturers Skil Routers 1840 F 012 184 000

Skil 1840 Parts (F 012 184 000)

39 Compatible Accessories Available!

Enhance your Skil F 012 184 000 with our range of accessories

1 2610992421

Housing

£11.64

2 2610353383

Pole Shoe

£0.00

3 2610353355

Armature

£0.00

4 2607200251

On-off Switch

£6.56 Not Available

5 3604460555

Power Supply Cord

£8.73

6 2610313327

Grommet

£2.00 Not Available

8 2610967483

Nameplate

£0.00

9 2610967484

Label

£0.00

13 1619P01511

Ball Bearing

£4.78

14 2610042699

Deep-groove Ball Bearing

£8.73

16 2610341257

Brush Holder

£1.67 Not Available

17 2610353407

Spring

£1.00

18 2610991352

Connecting Cable

£0.00

19 2610991355

Connecting Cable

£0.00

20 2610355657

Bolt

£0.00

21 2610350655

Rubber Buffer

£1.00

22 2610990690

Guide

£0.00

23 2610353373

Knob

£2.00 Not Available

24 2610990691

Compression Spring

£0.00

25 2610353378

Support

£1.90

26 2610353379

Spring

£1.00

27 2610353380

Spring

£1.00

29 2610353425

Plate

£3.03

30 2610990692

Handle Cover

£0.00

31 2610990693

Handle Cover

£0.00

33 2610992422

Cover

£0.00

34 2610991393

Pivot Plate

£0.00

35 2610353370

Base Plate

£4.01

36 2610353433

Bolt

£1.00

37 2610353434

Lever

£0.00

38 2610911048

Tolerance Ring

£2.33

39 2610913861

Sticker

£0.00

41 2610990695

Plain Bearing

£0.00

42 2610993644

Nut

£0.00

43 2610990698

Bellows

£7.25

48 2610364033

Cable Clip

£2.33

49 2610353372

Screw

£1.00

57 2610993645

Collet Chuck

£0.00

60 2610011489

Nut

£1.00

61 2610067431

Ring

£1.00

62 2610318720

Screw

£1.00

63 1619X00504

Screw

£1.00

64 2610347103

Screw

£2.05

65 2610350698

Screw

£1.00

66 2610350943

Screw

£1.00

67 2610315386

Screw

£1.00

68 2610353386

Nut

£1.00 Not Available

70 2610317009

Nut

£1.00

71 2610001309

Nut

£1.00

81 2610992473

Washer

£0.00

650 2610309249

Screw

£1.00

651 2610993579

Adjusting Wrench

£0.00

653 2610353395

Plate

£3.03

751 2610091803

Insert

£7.01

810 2610992423

Carbon-brush Set

£6.56

840 2610992425

Base

£0.00

Ref	Part Number	Description	Price
1	2610992421	Housing	£11.64
2	2610353383	Pole Shoe	£0.00	Contact Us
3	2610353355	Armature	£0.00	Contact Us
4	2607200251	On-off Switch	£6.56	Not Available
5	3604460555	Power Supply Cord	£8.73
6	2610313327	Grommet	£2.00	Not Available
8	2610967483	Nameplate	£0.00	Contact Us
9	2610967484	Label	£0.00	Contact Us
13	1619P01511	Ball Bearing	£4.78
14	2610042699	Deep-groove Ball Bearing	£8.73
16	2610341257	Brush Holder	£1.67	Not Available
17	2610353407	Spring	£1.00
18	2610991352	Connecting Cable	£0.00	Contact Us
19	2610991355	Connecting Cable	£0.00	Contact Us
20	2610355657	Bolt	£0.00	Contact Us
21	2610350655	Rubber Buffer	£1.00
22	2610990690	Guide	£0.00	Contact Us
23	2610353373	Knob	£2.00	Not Available
24	2610990691	Compression Spring	£0.00	Contact Us
25	2610353378	Support	£1.90
26	2610353379	Spring	£1.00
27	2610353380	Spring	£1.00
29	2610353425	Plate	£3.03
30	2610990692	Handle Cover	£0.00	Contact Us
31	2610990693	Handle Cover	£0.00	Contact Us
33	2610992422	Cover	£0.00	Contact Us
34	2610991393	Pivot Plate	£0.00	Contact Us
35	2610353370	Base Plate	£4.01
36	2610353433	Bolt	£1.00
37	2610353434	Lever	£0.00	Contact Us
38	2610911048	Tolerance Ring	£2.33
39	2610913861	Sticker	£0.00	Contact Us
41	2610990695	Plain Bearing	£0.00	Contact Us
42	2610993644	Nut	£0.00	Contact Us
43	2610990698	Bellows	£7.25
48	2610364033	Cable Clip	£2.33
49	2610353372	Screw	£1.00
57	2610993645	Collet Chuck	£0.00	Contact Us
60	2610011489	Nut	£1.00
61	2610067431	Ring	£1.00
62	2610318720	Screw	£1.00
63	1619X00504	Screw	£1.00
64	2610347103	Screw	£2.05
65	2610350698	Screw	£1.00
66	2610350943	Screw	£1.00
67	2610315386	Screw	£1.00
68	2610353386	Nut	£1.00	Not Available
70	2610317009	Nut	£1.00
71	2610001309	Nut	£1.00
81	2610992473	Washer	£0.00	Contact Us
650	2610309249	Screw	£1.00
651	2610993579	Adjusting Wrench	£0.00	Contact Us
653	2610353395	Plate	£3.03
751	2610091803	Insert	£7.01
810	2610992423	Carbon-brush Set	£6.56
840	2610992425	Base	£0.00	Contact Us

Accessories for Skil F 012 184 000

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 39 accessories available.

Scroll down to view them.

View both spares and accessories