Metabo 316097200 Spare Part - Housing compl. f. jaw

Original Metabo cage with jaws — part no. 316097200. Direct replacement assembly for the rivet‑jaw section (cage + jaws) used on Metabo NP 18 LTX BL 5 series rivet guns; designed to restore positive mandrel gripping and smooth mandrel ejection so your tool once again pulls and releases rivets reliably.

What you get: the complete jaw/cage assembly, machined jaw surfaces and locating features that mate with the tool’s guide rail and retaining‑nozzle system. The assembly is built to accept the standard retaining/standard nosepieces used on the NP 18 series (2.4 mm, 3.2 mm, 4.0 mm and 4.8 mm) and works with the tool’s rivet range (2.4–5.0 mm). Replacing this part corrects worn or damaged jaws that cause slipping, incomplete swarf capture or poor ejection.

Example fitment: Metabo NP 18 LTX BL 5 models (including the BL 5.0 variants – e.g. NP 18 LTX BL 5.0 body models). If your tool is listed as an NP 18 LTX BL 5 series, this is the original Metabo part you should use to restore correct jaw function.

A short, practical note: this is a genuine Metabo spare part intended as a direct mechanical replacement — swap the worn jaw/cage for this unit and you’ll get the original fit and alignment without modifying the tool. Metabo spare parts like this one are made to the same dimensional interfaces as the original assembly, so reassembly is straightforward for a competent technician.