Metabo 141180110 Spare Part - Retaining ring

141180110 supersedes older part numbers: 6400047357

Metabo 141180110 — retaining ring / snap ring (original Metabo)

Restore secure shaft and bearing retention with this original Metabo retaining ring (part no. 141180110). It’s a stamped spring-steel circlip (snap ring) used to lock bearings, flanges or sleeves into a machined groove — install or remove with standard circlip pliers. The ring is specified for a 17 mm shaft/groove (commonly listed as “17”), so it matches the groove/shaft sizes used in several Metabo machines.

Example Metabo tools that use part 141180110 include the MH10S rotary hammer (model 06002420), the CS 23‑355 metal chop saw series (models 02335380 / 02335390), and Metabo BAS series precision band saws such as the BAS 318 / BAS 317. These are representative examples from Metabo parts diagrams where this retaining ring secures shafts or bearing assemblies.

Dimensional note (metric): the part is identified as a “17” snap/retaining ring (for a 17 mm shaft). Metric snap rings of this size typically require a groove/shaft nominal of 17 mm, with an outer/free diameter on the order of ≈18–19 mm and a ring thickness/groove-width in the region of about 1.0–1.2 mm — consistent with standard M17 snap-ring dimensions used in Metabo assemblies. (If you need to confirm groove depth/width for your specific housing).

Why buy this part: it’s the original Metabo retaining ring specified in official Metabo parts lists, so it’s shaped and sized to seat correctly in the groove and hold bearings or shafts in place — a small part that prevents larger failures when it’s intact.