Makita 922241-7 Spare Part - HEX SOCKET HD BOLT M5X25/365U
Original Makita hex‑socket head bolt, part number 922241‑7 (AN451‑T2) — M5 × 25 mm hex socket head cap screw, the same fastener used in Makita service parts diagrams for nailers and handheld tools.
This genuine Makita bolt is the replacement fastener shown in Makita parts lists (example: AG090 pneumatic nailer parts diagram lists 922241‑7 as H.S.H. BOLT M5×25) and appears on fitment lists for other Makita models such as AG125 and AN451 and many handheld models across Makita’s lineup. Use it wherever an M5×25 hex‑socket cap screw is specified in your tool’s parts breakdown.
Simple install: 5 mm thread diameter, 25 mm length — fits into M5 threaded holes and is tightened with a 3 mm (approx.) hex key/socket for the internal drive. If your parts diagram or exploded view shows 922241‑7, this is the original Makita replacement bolt you need.
Jump straight to the Makita spare parts diagrams:
Compatible models this part will fit:
- Makita AG125 - AG125
- Makita AN451 - AN451
- Makita AN504 - AN504
- Makita EBH253L - EBH253L
- Makita HR2811F - HR2811F
- Makita HR2811FT - HR2811FT
- Makita LS0810 - LS0810
- Makita BBC231U - BBC231U
- Makita BC231UD - BC231UD
- Makita BC300LD - BC300LD
- Makita EM2651LH - EM2651LH
- Makita EM2651UH - EM2651UH
- Makita DUR361U - DUR361U
- Makita EBH252U - EBH252U
- Makita EN5950SH - EN5950SH
- Makita DUR364L - DUR364L
- Makita DUR365U - DUR365U
- Makita EM2511 - EM2511
- Makita EM2654 - EM2654
- Makita ELM3711 - ELM3711
- Makita EN4950H - EN4950H
- Makita EN4951SH - EN4951SH
- Makita MS245.4CE - MS245.4CE
- Makita MS245.4U - MS245.4U
- Makita MS245.4UE - MS245.4UE
- Makita MS247CE - MS247CE
- Makita MS248.4CE - MS248.4CE
- Makita MH246.4D - MH246.4D
- Makita MH2556 - MH2556
- Makita EBH252L - EBH252L
Showing first 30 compatible models. Contact us for full compatibility info.
