Makita 211137-0 Spare Part - BALL BEARING 6201LLU HM0860C

Original Makita part 211137-0 — deep‑groove ball bearing (type 6201LLU), sealed both sides with rubber contact seals. Precision single‑row bearing with a 12 mm bore, 32 mm outer diameter and 10 mm width (12 × 32 × 10 mm); designed to support rotating shafts in motor/armature and gearbox assemblies and to resist dust and grit for quieter, cooler running.

Why this part matters for repairs: the double rubber seals (LLU) keep lubricant in and contamination out, so replacing a noisy, hot, or loose bearing with this original Makita unit restores correct shaft alignment and reduces vibration and wear on adjacent components. The 211137-0 is the sealed 6201 bearing used in Makita motors and gear housings.

Example models where 211137-0 is listed as a replacement part (representative, not exhaustive): GA7050 / GA7050R and GA9050 angle grinders; HM0830 / HM0830T / HM0860C demolition hammers; HR4001C, HR4002, HR4010C, HR4011C, HR4013C rotary hammers; DHR400 rotary hammer; TW1000 impact wrench; PK5011C and UR012G among others. These model references come from Makita parts listings and exploded diagrams that show 211137-0 as the 6201LLU bearing.

Fit/installation notes: this is a direct replacement bearing sized to press onto a 12 mm shaft and into a 32 mm housing bore; installation typically requires a bearing puller/press or careful drift and even heat/cold fit technique to avoid damage to the seals or race. For tasks involving multiple power tool parts, replacing bearings in pairs (where applicable) and cleaning the housing before installation helps ensure long service life.

If you need a compact, sealed original Makita 6201LLU bearing to get a grinder, rotary hammer or impact wrench back to smooth operation, the 211137-0 is the specified replacement called out in Makita parts diagrams for the models above.

Jump straight to the Makita spare parts diagrams:

• Makita DHR400 Parts
• Makita GA7050 Parts
• Makita GA7050R Parts
• Makita GA9050 Parts
• Makita HM0830T Parts
• Makita HM0860C Parts
• Makita HR4001C Parts
• Makita HR4002 Parts
• Makita HR4010C Parts
• Makita HR4011C Parts
• Makita HR4013C Parts
• Makita TW1000 Parts
• Makita UR012G Parts

Browse our full range of Makita grinder parts. Makita impact wrench parts. Makita hammer drill parts.