Makita 194435-6 Spare Part - CARBON BRUSH CB441 CB432 CB429
195022-4 supersedes older part number: 194435-6
CB441 replaces CB432 and CB429
Makita 195022-4 (CB441 CB432 CB429) — Carbon brush set for brushed Makita motors
Restore reliable motor contact and smooth starting/braking with this original Makita carbon brush set (part no. 195022-4 / CB441 CB432 CB429). These are the replacement carbon blocks and hardware used on a range of Makita brushed motors — supplied as a matched set to replace worn or damaged brushes and their spring/cap assemblies.
Key details
- Part: Makita 195022-4 (marked CB441 CB432 CB429).
- What you get: a carbon brush set (pair of Carbon brushes)
- Carbon block nominal dimensions (approx.): width ~6.9–7.0 mm, height ~10.8–11 mm, length ~12.7–13 mm.
- Purpose: restores electrical contact to the armature/commutator, improves motor power, prevents intermittent operation and preserves armature life when installed before severe wear occurs.
Example Makita models this brush set is listed as compatible with the following :
- Cordless/corded rotary hammers and drills: DHR202, DHR241 / BHR202, BHR241.
- Reciprocating/jigsaws and saws: DJR181, DJR186, JR140D / JR180D.
- Impact and wrench series: DTW450, BTW200/BTW450 / DTW450 listed among compatible impacts.
- Other workshop tools cited with this part include various drills, circular saws and planers that use the CB‑441, CB432 or CB429 brush family — check the model list in your tool’s parts breakdown to confirm fit.
Why choose this Makita brush set
- Direct-fit, original Makita part number used in the factory assemblies for the tool families above — designed for correct seating, lead routing and spring tension so brushes wear evenly and protect the armature.
Installation note (brief)
- Replace brushes as a matched pair; inspect the armature/commutator for heavy burning or scoring — severely damaged commutators may require additional service. Brush wear limits vary by tool; install before the carbon is near the lead to avoid intermittent contact.
Jump straight to the Makita spare parts diagrams:
- Makita BHR202 Parts
- Makita BTW450 Parts
- Makita DHR202 Parts
- Makita DHR241 Parts
- Makita DJR181 Parts
- Makita DJR186 Parts
- Makita DTW450 Parts
- Makita JR140D Parts
Browse our full range of Makita circular saw parts. Makita drill parts. Makita jigsaw parts. Makita planer parts. Makita hammer drill parts.
Compatible models this part will fit:
- Makita 4334D - 4334D
- Makita 5621RD - 5621RD
- Makita BHR202 - BHR202
- Makita BHR241 - BHR241
- Makita BJR181 - BJR181
- Makita BJR182 - BJR182
- Makita BJR240 - BJR240
- Makita BLS820 - BLS820
- Makita BSR730 - BSR730
- Makita BSS610 - BSS610
- Makita BSS611 - BSS611
- Makita BTW200 - BTW200
- Makita BTW450 - BTW450
- Makita JR140D - JR140D
- Makita JR180D - JR180D
- Makita LS800D - LS800D
- Makita BLS713 - BLS713
- Makita BHS630 - BHS630
- Makita BKP180 - BKP180
- Makita DHR202 - DHR202
- Makita DJR181 - DJR181
- Makita DJR182 - DJR182
- Makita DKP180 - DKP180
- Makita DSS610 - DSS610
- Makita DSS611 - DSS611
- Makita DTW450 - DTW450
- Makita DLS713 - DLS713
- Makita DHS630 - DHS630
- Makita DJR186 - DJR186
- Makita DHR241 - DHR241
Showing first 30 compatible models. Contact us for full compatibility info.
