Makita 153289-0 Spare Part - *CHANGE LEVER COMP HR2020/HR24
Makita part 153289-0 — Change Lever Complete (genuine Makita)
Restore mode-selection on your rotary hammer with the original Makita change lever complete (part no. 153289-0). This compact replacement is the molded change/selection lever that engages the clutch cam to switch operating modes on Makita SDS rotary hammers. It’s supplied as the complete lever sub‑assembly (cap and lever seating location are shown in Makita parts diagrams), so you get the correctly shaped lever and mounting features needed for a direct fit and reliable operation.
Typical fitment examples
- Makita HR2020.
- Makita HR2021 / HR2022.
- Makita HR2440 (and related HR2440-series rotary hammers).
What you should know before replacing
- The part is the original Makita change lever complete used in the change lever/clutch cam area; if the lever’s pin portion has melted or the clutch cam is damaged, Makita’s service guidance calls for replacing the full change lever assembly (part no. 184678-8) rather than only the lever.
- Removal is straightforward on these models — the lever is accessed by removing the small cap shown in the parts diagram (cap part shown in the HR2440 parts list), then swapping in the new lever. Refer to the tool’s exploded diagram or service instructions for the exact disassembly steps before beginning.
Why choose the original Makita change lever complete
- Correct form, fit and mounting features for the listed Makita rotary hammers.
- Direct replacement for the part number printed on Makita diagrams — restores the intended selector action and engagement with the clutch cam.
This description is based on Makita parts diagrams and technical service information for the HR2020/HR2021/HR2022/HR2440 family; if your model isn’t listed above, check your tool’s part diagram against 153289-0 before ordering.
Jump straight to the Makita spare parts diagrams:
Browse our full range of Makita hammer drill parts.
Compatible models this part will fit:
