Hitachi DH45MR Parts
Drawings
| Ref | Part Number | Description | Price | |
|---|---|---|---|---|
| *90 | 500487Z | Cord | £0.00 |
|
| *90 | 500487Z | Cord | £0.00 |
|
| 1 | 321-306 | Front Cap | £4.43 |
|
| 2 | 321-305 | Grip | £6.62 |
|
| 3 | 318-590 | Stopper Ring | £1.87 |
|
| 4 | 321-304 | Needle Holder | £26.94 |
|
| 5 | 321-303 | Retainer Spring | £6.62 |
|
| 6 | 321-302 | Spring Holder (a) | £6.62 |
|
| 7 | 981-942 | Seal Lock Hex. Socket Hd. Bolt M6x25 | £2.48 |
|
| 8 | 321-300 | Front Cover | £25.16 |
|
| 9A | 878-867 | O-ring (jaso2060) | £2.82 |
|
| 9 | 956-996 | O-ring (1as-60) | £3.52 |
|
| 10 | 321-301 | Oil Seal | £8.77 |
|
| 11 | 325-229 | Rubber Ring | £3.87 |
|
| 12 | 315-868 | Urethane Ring Holder | £2.87 |
|
| 13 | 948-131 | Retaining Ring For D35 Shaft | £1.00 |
|
| 14 | 600-7DD | Ball Bearing 6007dduav2s | £14.89 |
|
| 15 | 321-297 | Bearing Washer | £4.43 |
|
| 16 | 313-421 | Needle Roller D8x20 | £5.70 |
|
| 17 | 324-919 | Retainer Sleeve | £94.63 |
|
| 18 | 324-921 | O-ring (c) | £3.98 |
|
| 19 | 324-920 | Second Hammer | £14.03 |
|
| 20 | 324-922 | Damper Washer | £7.73 |
|
| 21 | 324-923 | Damper | £3.98 |
|
| 22 | 324-924 | Damper Holder | £7.73 |
|
| 23 | 313-057 | Needle Pin D6x6 | £3.30 |
|
| 24 | 324-925 | Cylinder | £83.52 |
|
| 25 | 324-930 | Lock Spring | £2.09 |
|
| 26 | 324-931 | Lock Sleeve | £5.86 |
|
| 27 | 324-927 | Spring Holder (b) | £7.73 |
|
| 28 | 324-928 | Clutch Spring | £2.09 |
|
| 29 | 324-926 | Striker | £14.03 |
|
| 30A | 325-297 | O-ring (i.d 27.2) | £3.98 |
|
| 31 | 324-929 | Clutch | £55.20 |
|
| 32 | 324-917 | Piston Pin | £5.86 |
|
| 33 | 324-915 | Piston | £7.73 |
|
| 34 | 324-916 | Connecting Rod | £7.73 |
|
| 35 | 324-932 | Cylinder Case | £55.20 |
|
| 36 | 991-712 | Hex. Socket Hd. Bolt (w/flange) M6x25 | £1.00 |
|
| 37 | 324-933 | Bevel Gear | £43.65 |
|
| 39 | 983-162 | Seal Lock Hex. Socket Hd. Bolt M4x12 | £1.00 |
|
| 40A | 331545 | Change Lever | £4.43 |
|
| 41 | 324-935 | Lever Holder | £3.98 |
|
| 42 | 311-229 | Retaining Ring For D20 Hole | £1.00 |
|
| 43 | 324-934 | Lever Shaft | £22.33 |
|
| 44 | 873-095 | O-ring (p-16) | £1.00 |
|
| 45 | 321-310 | Lever Spring | £2.28 |
|
| 46 | 321-311 | Pushing Button | £2.28 |
|
| 47 | 321-312 | Pin D2x10 | £2.28 |
|
| 48 | 939-540 | Retaining Ring For D10 Shaft (10 Pcs.) | £2.48 |
|
| 49 | 324-909 | Crank Shaft | £36.43 |
|
| 50 | 971-750 | Feather Key 3x3x20 | £1.00 |
|
| 51 | 948-391 | Retaining Ring For D40 Hole | £1.00 |
|
| 52 | 620-3DD | Ball Bearing 6203ddcmps2l | £7.72 |
|
| 53 | 996-363 | O-ring (s-40) | £1.00 |
|
| 54 | 971-745 | Oil Seal (a) | £4.79 |
|
| 55 | 986-940 | Seal Lock Hex. Socket Hd. Bolt M6x45 | £1.00 |
|
| 56 | 994-192 | Hex. Socket Hd. Bolt (w/flange) M5x16 | £1.00 |
|
| 57 | 324-937 | Crank Cover | £11.41 |
|
| 58 | 324-912 | Slip Clutch Ass'y | £155.37 |
|
| 59 | 944-109 | Feather Key 3x3x8 | £3.05 |
|
| 60 | 324-913 | Bevel Pinion | £18.37 |
|
| 61 | 321-279 | Collar | £11.33 |
|
| 62 | 313-050 | Oil Seal (a) | £4.28 |
|
| 63 | 600-2DD | Ball Bearing 6002ddcmps2l | £7.72 |
|
| 64 | 313-058 | Washer | £1.00 |
|
| 65 | 313-053 | Washer (a) | £4.08 |
|
| 66 | 321-281 | Gear Holder | £21.94 |
|
| 67 | 321-282 | Spring (c) | £2.28 |
|
| 68 | 320-343 | Needle | £3.87 |
|
| 69 | 324-914 | Second Gear | £33.39 |
|
| 70 | 321-283 | Spacer | £17.59 |
|
| 71 | 629-VVM | Ball Bearing 629vvc2ps2l | £5.42 |
|
| 72 | 944-525 | Bearing Washer (c) | £1.00 |
|
| 73 | 325-230 | Seal Packing | £3.87 |
|
| 74 | 324-944 | Gear Cover | £33.39 |
|
| 75 | 324-947 | Handle | £22.18 |
|
| 77 | 324-938 | Sds Max Label | £2.09 |
|
| 78 | 313-078 | Side Handle | £15.01 |
|
| 79 | 313-079 | Handle Holder | £14.72 |
|
| 80 | 980-673 | Hex. Socket Hd. Bolt (w/flange) M5x40 | £1.00 |
|
| 81 | 313-093 | Switch (c) (2p Screw Type W/o Lock) | £13.45 |
|
| 82 | 938-307 | Pillar Terminal | £3.05 |
|
| 83 | 324-948 | Handle Cover | £14.44 |
|
| 84 | 301-653 | Tapping Screw (w/flange) D4x20 (black) | £1.00 |
|
| 85 | 981-373 | Tube (d) | £1.00 |
|
| 86 | 980-063 | Terminal | £1.00 |
|
| 86 | 930-804 | Terminal M4.0 (10 Pcs.) | £3.36 |
|
| 87 | 960-266 | Cord Clip | £1.00 |
|
| 87 | 981-987Z | Cord Clip | £0.00 |
|
| 88 | 984-750 | Tapping Screw (w/flange) D4x16 | £1.00 |
|
| 89 | 953-327 | Cord Armor D8.8 | £1.00 |
|
| 89 | 938-051 | Cord Armor D10.1 | £1.00 |
|
| 90 | 500-439Z | Cord | £41.19 |
|
| 90 | 500-390Z | Cord | £32.79 |
|
| 90 | 500-391Z | Cord | £53.48 |
|
| 90 | 500-408Z | Cord | £0.00 |
|
| 90 | 500-446Z | Cord | £30.56 |
|
| 90 | 500-434Z | Cord | £0.00 |
Not Available
|
| 90 | 500-467Z | Cord | £58.56 |
|
| 91 | 313-080 | Handle Bolt | £9.38 |
|
| 92 | 971-786 | Stopper Rod | £6.25 |
|
| 93 | 998-471 | Hex. Socket Hd. Bolt M5x12 | £1.00 |
|
| 94 | 324-936 | Hood (a) | £15.29 |
|
| 96 | 324-908 | Crank Case | £46.58 |
|
| 97 | 324-910 | First Gear | £25.34 |
|
| 98 | 324-911 | Second Pinion | £15.19 |
|
| 99 | 939-299 | Needle Bearing (m661) | £11.17 |
|
| 100 | 961-501 | Hex. Hd. Tapping Screw D5x60 | £1.00 |
|
| 101 | 340-646C | Stator Ass'y 110v | £59.06 |
|
| 101 | 340-646G | Stator Ass'y 120v | £0.00 |
|
| 101 | 340-646E | Stator Ass'y 230v | £59.06 |
|
| 101 | 340-646F | Stator Ass'y 240v | £0.00 |
|
| 103 | 324-943 | Housing Ass'y | £83.52 |
|
| 104 | 945-161 | Brush Cap | £2.12 |
|
| 105 | 999-071 | Carbon Brush (auto Stop Type) (1 Pair) | £15.02 |
|
| 106 | 962-777 | Brush Holder | £7.66 |
|
| 107 | 938-477 | Hex. Socket Set Screw M5x8 | £1.00 |
|
| 108 | 324-946 | Tail Cover | £0.00 |
Not Available
|
| 109 | 984-508 | Seal Lock Hex. Socket Hd. Bolt M5x20 | £1.00 |
|
| 110 | 321-313 | Seal Lock Hex. Socket Hd. Bolt M6x22 | £2.28 |
|
| 111 | 937-623 | Brush Terminal | £1.00 |
|
| 112 | 321-322 | Vinyl Tube | £2.28 |
|
| 113 | 985-436 | Dust Washer | £1.00 |
|
| 114 | 620-0VV | Ball Bearing 6200vvcmps2l | £6.60 |
|
| 115 | 318-721 | Magnet | £18.61 |
|
| 116 | 620-2DD | Ball Bearing 6202ddcmps2l | £6.57 |
|
| 117 | 980-700 | Dust Washer (b) | £1.00 |
|
| 118 | 318-918 | Fan | £3.52 |
|
| 119 | 360-737C | Armature Ass'y 110v | £100.01 |
|
| 119 | 360-737U | Armature Ass'y 120v | £0.00 |
|
| 119 | 360-737E | Armature Ass'y 230v | £100.01 |
|
| 119 | 360-737F | Armature Ass'y 240v | £0.00 |
|
| 120 | 324-945 | Fan Guide | £5.86 |
|
| 121 | 324-942 | Case (b) | £5.86 |
|
| 122 | 324-940 | Controller Circuit 110v | £87.00 |
|
| 122 | 324-941 | Controller Circuit 120v | £0.00 |
|
| 122 | 324-939 | Controller Circuit 230v-240v | £87.00 |
|
| 123 | 317-113 | Internal Wire | £3.80 |
|
| 501 | 324-820 | Case (plastic) | £84.81 |
|
| 502 | 981-840 | Grease (a) For Hammer.hammer Drill (30g | £7.36 |
|
| 503 | 944-458 | Hex. Bar Wrench 4mm | £1.00 |
|
| 504 | 944-459 | Hex. Bar Wrench 5mm | £1.00 |
|
| 601 | 308-471 | Grease For Hammer.hammer Drill (70g) | £15.25 |
|
| 602 | 980-927 | Grease For Hammer.hammer Drill (500g) | £52.40 |
|
| 603 | 320-859 | Syringe (blow-out Bulb Type) | £9.81 |
|
| 604 | 318-085 | Syringe (bellows Type) | £3.56 |
|
| 605 | 313-448 | Drill Bit (sds Max) D16x340 | £0.00 |
|
| 606 | 313-456 | Drill Bit (sds Max) D16x540 | £0.00 |
|
| 607 | 313-449 | Drill Bit (sds Max) D19x340 | £0.00 |
|
| 608 | 313-457 | Drill Bit (sds Max) D19x540 | £0.00 |
|
| 609 | 313-450 | Drill Bit (sds Max) D22x320 | £0.00 |
|
| 610 | 313-458 | Drill Bit (sds Max) D22x520 | £0.00 |
|
| 611 | 313-451 | Drill Bit (sds Max) D25x320 | £0.00 |
|
| 612 | 313-459 | Drill Bit (sds Max) D25x520 | £0.00 |
|
| 613 | 313-452 | Drill Bit (sds Max) D28x370 | £0.00 |
|
| 614 | 313-460 | Drill Bit (sds Max) D28x570 | £0.00 |
|
| 615 | 313-453 | Drill Bit (sds Max) D32x370 | £0.00 |
|
| 616 | 313-461 | Drill Bit (sds Max) D32x570 | £0.00 |
|
| 617 | 313-454 | Drill Bit (sds Max) D38x370 | £0.00 |
|
| 618 | 313-462 | Drill Bit (sds Max) D38x570 | £0.00 |
|
| 619 | 313-455 | Drill Bit (sds Max) D40x370 | £0.00 |
|
| 620 | 313-463 | Drill Bit (sds Max) D40x570 | £0.00 |
|
| 621 | 944-460 | Taper Shank Drill Bit D11x100 | £0.00 |
|
| 622 | 944-461 | Taper Shank Drill Bit D12.3x110 | £0.00 |
|
| 623 | 993-038 | Taper Shank Drill Bit D12.7x110 | £0.00 |
|
| 624 | 944-462 | Taper Shank Drill Bit D14.3x110 | £0.00 |
|
| 625 | 944-500 | Taper Shank Drill Bit D14.5x110 | £0.00 |
|
| 626 | 944-463 | Taper Shank Drill Bit D17.5x120 | £0.00 |
|
| 627 | 313-464 | Taper Shank Adapter Ass'y (sds Max) No. | £0.00 |
|
| 628 | 944-477 | Cotter | £4.70 |
|
| 629 | 313-465 | Adapter (sds Max) For Sds Plus Shank Bi | £0.00 |
|
| 630 | 955-994 | Core Bit 25mm | £33.49 |
|
| 631 | 955-995 | Core Bit 29mm | £78.75 |
|
| 632 | 955-996 | Core Bit 32mm | £92.05 |
|
| 633 | 955-997 | Guide Plate (for Core Bit 32mm) | £2.35 |
|
| 634 | 955-998 | Core Bit 35mm | £105.38 |
|
| 635 | 955-999 | Guide Plate (for Core Bit 35mm) | £3.25 |
|
| 636 | 956-000 | Core Bit 38mm | £58.14 |
|
| 637 | 956-001 | Guide Plate (for Core Bit 38mm) | £5.59 |
|
| 638 | 955-154 | Core Bit 45mm | £118.68 |
|
| 639 | 955-166 | Guide Plate (for Core Bit 45mm) | £5.59 |
|
| 640 | 955-155 | Core Bit 54mm | £145.31 |
|
| 641 | 955-167 | Guide Plate (for Core Bit 54mm) | £5.59 |
|
| 642 | 956-002 | Core Bit 64mm | £171.93 |
|
| 643 | 956-003 | Guide Plate (for Core Bit 64mm) | £7.58 |
|
| 644 | 955-157 | Core Bit 79mm | £206.54 |
|
| 645 | 955-168 | Guide Plate (for Core Bit 79mm) | £9.89 |
|
| 646 | 956-004 | Core Bit 94mm | £305.05 |
|
| 647 | 956-005 | Guide Plate (for Core Bit 94mm) | £6.94 |
|
| 648 | 955-159 | Core Bit 105mm | £352.99 |
|
| 649 | 955-169 | Guide Plate (for Core Bit 105mm) | £7.38 |
|
| 650 | 313-466 | Core Bit Shank (b) Sds Max D25-35 | £72.10 |
|
| 651 | 313-467 | Core Bit Shank (a) Sds Max D38-150 | £82.75 |
|
| 652 | 956-009 | Center Pin (b) 147l For Core Bit D32-35 | £36.38 |
|
| 653 | 955-165 | Center Pin (a) 133l For Core Bit D38-15 | £31.03 |
|
| 654 | 321-813 | Drill Chuck 13vld-d | £0.00 |
Not Available
|
| 655 | 313-468 | Chuck Adapter (sds Max) | £48.82 |
|
| 656 | 303-334 | Chuck Handle | £0.00 |
|
| 657 | 313-469 | Chemical Anchor Adapter (sds Max) 12.7m | £36.32 |
|
| 658 | 313-470 | Chemical Anchor Adapter (sds Max)19mm | £42.16 |
|
| 659 | 313-471 | Bull Point (sds Max) 280l | £0.00 |
|
| 660 | 313-472 | Bull Point (sds Max) 400l | £0.00 |
|
| 661 | 313-473 | Cold Chisel (sds Max) 280mm | £0.00 |
|
| 662 | 313-474 | Cold Chisel (sds Max) 400mm | £0.00 |
|
| 663 | 313-475 | Cutter (sds Max) W50x400l | £0.00 |
|
| 664 | 313-476 | Scoop (sds Max) 400l | £0.00 |
|
| 665 | 313-478 | Rammer (sds Max) 150mm X 150mm | £0.00 |
|
| 666 | 313-477 | Bushing Tool (sds Max) | £0.00 |
|
| 667 | 313-479 | Shank (sds Max)for Rammer,bushing Tool | £36.32 |
|
| 668 | 956-006 | Core Bit 120mm | £0.00 |
|
| 669 | 956-007 | Guide Plate (for Core Bit 120mm) | £0.00 |
|