Your cart is empty
Browse spare parts →
Click here to jump straight to: Makita LS0714 Parts (Spare Parts Drawings & Parts List)
If your Makita LS0714 mitre saw is sparking, it is usually a sign that one of the motor components is worn or damaged. While small sparks from the carbon brushes are normal, excessive or bright sparking indicates a fault that should be repaired to prevent further damage to the motor.
Below we explain the most common reasons a Makita LS0714 sparks and how to fix the problem.
A small amount of sparking inside the motor is normal during operation, especially when new carbon brushes are fitted. However, if the sparking is:
Then a fault is likely present.
Carbon brushes wear down with use and can cause excessive sparking when they no longer make proper contact with the commutator.
Symptoms:
Solution:
Replace the carbon brushes with the correct Makita LS0714 compatible brushes.
A faulty armature is a very common cause of sparking on the Makita LS0714.
Symptoms:
Solution:
Fit a replacement Makita LS0714 armature.
The commutator is the copper segment the brushes contact. Dirt, carbon dust, or scoring can cause poor contact and arcing.
Symptoms:
Solution:
Clean the commutator carefully or replace the armature if badly worn.
If the brush springs lose tension, the brushes cannot maintain proper contact with the commutator.
Symptoms:
Solution:
Replace the brush holders or brush assemblies.
A short circuit in the field coil can cause abnormal sparking and overheating.
Symptoms:
Solution:
Replace the Makita LS0714 field coil.
It is not recommended. Continued use can damage the armature and field coil, leading to a more expensive repair. Replacing worn brushes early can often prevent major motor failure.
Some parts may also fit:
Always confirm your model number before ordering spare parts.
If your Makita LS0714 is sparking, the most likely causes are:
In most cases, replacing the correct Makita LS0714 parts will restore normal operation and prevent further damage.
