Home Manufacturers Bosch Routers Router POF 50 0 603 261 932

Bosch Router POF 50 Parts (0 603 261 932)

39 Compatible Accessories Available!

Enhance your Bosch 0 603 261 932 with our range of accessories

1 2605102014

Motor Housing

£0.00

2 2600500033

Cupped Washer

£2.33

3 2600905005

Deep-groove Ball Bearing

£0.00

4 2916660013

Spring Retaining Ring

£2.05

5 2600300062

Bushing

£1.61 Not Available

6 2604010355

Armature

£0.00 Not Available

7 2916650006

Spring Retaining Ring

£1.00

8 2600108033

Felt Washer

£1.00

9 2604220251

Field

£0.00 Not Available

9 2604220285

Pole Shoe

£0.00

10 2604611024

Compression Spring

£2.05

11 2605808900

Commutator End Shield

£0.00

12 2603320001

Square Nut

£1.00

14 2910021122

Socket Head Cap Screw

£2.05

20 1604652004

Spiral Spring

£2.33

21 2910601004

Tapping Screw

£0.00

22 1604321900

Carbon Brush

£2.68 Not Available

24 2603410001

Socket Head Cap Screw

£1.00

25 2607200048

On-off Switch

£9.91 Not Available

26 2607329056

Suppression Capacitor

£0.00 Not Available

27 2604460053

Elec. Cable W/connection

£5.91 Not Available

28 2600703011

Grommet

£2.45

28 2600703012

Grommet

£2.33

28 2600703013

Grommet

£2.33

29 2601035001

Cable Clip

£1.00

30 2603490021

Torx Oval-head Screw

£1.00

31 2601100038

Nameplate

£0.00

32 1900905019

Deep-groove Ball Bearing

£10.06

39 2600508008

Housing Cover

£0.00

39 2600508028

Housing Cover

£0.00

40 2910601020

Rec Ct-sunk Tapping Screw

£0.00

43 2603312001

Union Nut

£2.67 Not Available

48 2608570066

Collet

£12.47

48 2608570065

Collet

£5.46 Not Available

49 2600150003

Shim

£2.05

50 2600101655

Shim

£0.00

50 2600101656

Shim

£0.00

50 2600101657

Shim

£0.00

51 2601110238

Sticker

£0.00

52 1600102626

Shim

£2.05

100 2607030900

Milling Fixture

£0.00

101 2608000014

Base Plate

£1.00 Not Available

102 2604617001

Compression Spring

£1.00 Not Available

103 2601010052

Depth Measure

£1.67 Not Available

105 2608005014

Guide Plate

£16.29 Not Available

106 1603501018

Knurled Thumbscrew

£2.45 Not Available

107 2603345015

Adjusting Nut

£1.90 Not Available

108 2604611008

Compression Spring

£1.00 Not Available

109 1603129014

Detent Pin

£2.45

110 2911001258

Hex Screw

£1.90 Not Available

111 1603349014

Star Knob

£3.36 Not Available

112 2603200020

Pressure Spindle

£1.00 Not Available

113 1603481001

Handle

£9.28

114 1601110013

Manufacturer's Nameplate

£1.00

115 2916011884

Plain Washer

£1.00

117 2916011015

Plain Washer

£1.00

650 1907950508

Single-head Eng. Wrench

£10.06

651 2603101035

Straight Pin

£2.45

654 2602053000

Tool Guide

£4.37 Not Available

655 2607000032

Guide Plate

£1.74 Not Available

656 2910761197

Countersunk-head Screw

£1.00 Not Available

657 2910011191

Socket Head Cap Screw

£1.00 Not Available

658 2603102007

Guiding Bolt

£1.90 Not Available

659 2607000067

Edge Guide

£11.20 Not Available

660 1603480003

Wing Screw

£1.00 Not Available

661 2607000033

Fluid-level Gauge

£0.00

662 2607000031

Guide Roller

£0.00

663 2915011007

Hex Nut

£1.00

665 2601332007

Guide-plate

£2.51 Not Available

669 1608857615

Wood Cutter

£0.00

669 1609200355

Wood Cutter

£0.00

827 1607000386

Power Supply Cord

£15.30

888 1601106032

Nameplate

£2.57

Ref	Part Number	Description	Price
1	2605102014	Motor Housing	£0.00	Contact Us
2	2600500033	Cupped Washer	£2.33
3	2600905005	Deep-groove Ball Bearing	£0.00	Contact Us
4	2916660013	Spring Retaining Ring	£2.05
5	2600300062	Bushing	£1.61	Not Available
6	2604010355	Armature	£0.00	Not Available
7	2916650006	Spring Retaining Ring	£1.00
8	2600108033	Felt Washer	£1.00
9	2604220251	Field	£0.00	Not Available
9	2604220285	Pole Shoe	£0.00	Contact Us
10	2604611024	Compression Spring	£2.05
11	2605808900	Commutator End Shield	£0.00	Contact Us
12	2603320001	Square Nut	£1.00
14	2910021122	Socket Head Cap Screw	£2.05
20	1604652004	Spiral Spring	£2.33
21	2910601004	Tapping Screw	£0.00	Contact Us
22	1604321900	Carbon Brush	£2.68	Not Available
24	2603410001	Socket Head Cap Screw	£1.00
25	2607200048	On-off Switch	£9.91	Not Available
26	2607329056	Suppression Capacitor	£0.00	Not Available
27	2604460053	Elec. Cable W/connection	£5.91	Not Available
28	2600703011	Grommet	£2.45
28	2600703012	Grommet	£2.33
28	2600703013	Grommet	£2.33
29	2601035001	Cable Clip	£1.00
30	2603490021	Torx Oval-head Screw	£1.00
31	2601100038	Nameplate	£0.00	Contact Us
32	1900905019	Deep-groove Ball Bearing	£10.06
39	2600508008	Housing Cover	£0.00	Contact Us
39	2600508028	Housing Cover	£0.00	Contact Us
40	2910601020	Rec Ct-sunk Tapping Screw	£0.00	Contact Us
43	2603312001	Union Nut	£2.67	Not Available
48	2608570066	Collet	£12.47
48	2608570065	Collet	£5.46	Not Available
49	2600150003	Shim	£2.05
50	2600101655	Shim	£0.00	Contact Us
50	2600101656	Shim	£0.00	Contact Us
50	2600101657	Shim	£0.00	Contact Us
51	2601110238	Sticker	£0.00	Contact Us
52	1600102626	Shim	£2.05
100	2607030900	Milling Fixture	£0.00	Contact Us
101	2608000014	Base Plate	£1.00	Not Available
102	2604617001	Compression Spring	£1.00	Not Available
103	2601010052	Depth Measure	£1.67	Not Available
105	2608005014	Guide Plate	£16.29	Not Available
106	1603501018	Knurled Thumbscrew	£2.45	Not Available
107	2603345015	Adjusting Nut	£1.90	Not Available
108	2604611008	Compression Spring	£1.00	Not Available
109	1603129014	Detent Pin	£2.45
110	2911001258	Hex Screw	£1.90	Not Available
111	1603349014	Star Knob	£3.36	Not Available
112	2603200020	Pressure Spindle	£1.00	Not Available
113	1603481001	Handle	£9.28
114	1601110013	Manufacturer's Nameplate	£1.00
115	2916011884	Plain Washer	£1.00
117	2916011015	Plain Washer	£1.00
650	1907950508	Single-head Eng. Wrench	£10.06
651	2603101035	Straight Pin	£2.45
654	2602053000	Tool Guide	£4.37	Not Available
655	2607000032	Guide Plate	£1.74	Not Available
656	2910761197	Countersunk-head Screw	£1.00	Not Available
657	2910011191	Socket Head Cap Screw	£1.00	Not Available
658	2603102007	Guiding Bolt	£1.90	Not Available
659	2607000067	Edge Guide	£11.20	Not Available
660	1603480003	Wing Screw	£1.00	Not Available
661	2607000033	Fluid-level Gauge	£0.00	Contact Us
662	2607000031	Guide Roller	£0.00	Contact Us
663	2915011007	Hex Nut	£1.00
665	2601332007	Guide-plate	£2.51	Not Available
669	1608857615	Wood Cutter	£0.00	Contact Us
669	1609200355	Wood Cutter	£0.00	Contact Us
827	1607000386	Power Supply Cord	£15.30
888	1601106032	Nameplate	£2.57

Accessories for Bosch 0 603 261 932

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 39 accessories available.

Scroll down to view them.

View both spares and accessories