Home Manufacturers Bosch Routers Router GOF 900 A 0 601 614 050

Bosch Router GOF 900 A Parts (0 601 614 050)

39 Compatible Accessories Available!

Enhance your Bosch 0 601 614 050 with our range of accessories

1 3605108580

Motor Housing

£18.41

3 3604010501

Armature

£117.30 Not Available

5 3605500593

Housing Cover

£0.00

6 3600590507

Air-deflector Ring

£1.90 Not Available

8 3600190520

Intermediate Plate

£8.73 Not Available

9 3605133526

Handle Cover

£5.30

10 3605133528

Handle Cover

£7.01

11 3601010519

Cover

£2.05

12 3601010517

Insert

£2.05

13 2610912599

Chip Deflector

£4.43 Not Available

14 1607000231

On-off Switch

£13.34

15 2601035001

Cable Clip

£1.00

16 3604460557

Power Supply Cord

£33.34

16 3604460645

Power Supply Cord

£9.05 Not Available

17 3600703509

Grommet

£1.84 Not Available

19 3604445718

Connecting Cable

£1.90

20 2610992432

Spring Washer

£0.00 Not Available

21 2610913173

Deep-groove Ball Bearing

£9.45

22 3600905510

Deep-groove Ball Bearing

£4.01

23 2916650006

Spring Retaining Ring

£1.00

24 3600034505

Retaining Plate

£3.03

25 3603300501

Hex Nut

£3.36

27 2915011005

Hex Nut

£1.00

30 2610910566

Tapping Screw

£1.00

32 3603301524

Union Nut

£0.00 Not Available

33 3601021509

Swing-plate

£6.12

34 3604651502

Torsion Spring

£1.16

35 3603415556

Pan Head Screw

£2.05

36 3603231539

Knob

£1.00

37 3600209500

Indicator Ring

£3.03

38 3600100528

Shim

£1.00

39 3600100527

Washer

£2.05

40 3600360507

Adjusting Sleeve

£7.42 Not Available

41 3600400507

Locking Piece

£2.45

42 2916690003

Spring Lock Washer

£1.00

43 3602000510

Locking Lever

£2.33

44 3603450503

Lock Bolt

£4.01

45 3604651503

Compression Spring

£2.05

46 2610997191

Depth-gauge

£8.73

47 2600590006

Ratchet Cap

£1.00

48 3916060500

Spring Washer

£1.00

49 2910641122

Oval-head Screw

£2.05

50 1613480008

Wing Screw

£1.00

51 3603211501

Knob

£2.33

52 3600240500

Locking Ring

£4.19

53 3604648504

Extension Spring

£2.00 Not Available

54 2610915161

Screw

£2.33 Not Available

55 2916650003

Spring Retaining Ring

£1.00

57 3604613508

Compression Spring

£1.00 Not Available

58 3603120502

Guide Piece

£2.05

59 2610990698

Bellows

£7.25

61 1604477005

Blade Terminal

£2.33

62 3604680502

Retaining Snap Ring

£1.00

63 2910871122

Countersunk-head Screw

£0.00 Not Available

64 1617328025

Suppression Filter

£0.00 Not Available

81 2916540007

Locking Washer

£1.00

82 3603410504

Screw

£2.05

83 1903230007

Ball

£1.00

85 3600210507

O-ring

£1.00

89 2610996090

Set Ring

£1.00 Not Available

650/3 1907950511

Single-head Eng. Wrench

£7.98 Not Available

731 2608570101

Collet Chuck

£27.50

731 2608570102

Collet Chuck

£32.20

731 2608570100

Collet Chuck

£29.35

802 2610907795

Field

£28.57

804 2610907867

Fan Housing

£54.47

807 3605702581

Base Plate

£50.31

810 3601119779

Nameplate

£0.00 Not Available

818/4 3604652501

Spiral Spring

£3.03

818/3 3604321513

Carbon-brush Set

£9.45

818 3604336510

Brush Holder

£18.51

828 2610907864

Rod

£7.76

829 2610907865

Pointer

£7.01

Ref	Part Number	Description	Price
1	3605108580	Motor Housing	£18.41
3	3604010501	Armature	£117.30	Not Available
5	3605500593	Housing Cover	£0.00	Contact Us
6	3600590507	Air-deflector Ring	£1.90	Not Available
8	3600190520	Intermediate Plate	£8.73	Not Available
9	3605133526	Handle Cover	£5.30
10	3605133528	Handle Cover	£7.01
11	3601010519	Cover	£2.05
12	3601010517	Insert	£2.05
13	2610912599	Chip Deflector	£4.43	Not Available
14	1607000231	On-off Switch	£13.34
15	2601035001	Cable Clip	£1.00
16	3604460557	Power Supply Cord	£33.34
16	3604460645	Power Supply Cord	£9.05	Not Available
17	3600703509	Grommet	£1.84	Not Available
19	3604445718	Connecting Cable	£1.90
20	2610992432	Spring Washer	£0.00	Not Available
21	2610913173	Deep-groove Ball Bearing	£9.45
22	3600905510	Deep-groove Ball Bearing	£4.01
23	2916650006	Spring Retaining Ring	£1.00
24	3600034505	Retaining Plate	£3.03
25	3603300501	Hex Nut	£3.36
27	2915011005	Hex Nut	£1.00
30	2610910566	Tapping Screw	£1.00
32	3603301524	Union Nut	£0.00	Not Available
33	3601021509	Swing-plate	£6.12
34	3604651502	Torsion Spring	£1.16
35	3603415556	Pan Head Screw	£2.05
36	3603231539	Knob	£1.00
37	3600209500	Indicator Ring	£3.03
38	3600100528	Shim	£1.00
39	3600100527	Washer	£2.05
40	3600360507	Adjusting Sleeve	£7.42	Not Available
41	3600400507	Locking Piece	£2.45
42	2916690003	Spring Lock Washer	£1.00
43	3602000510	Locking Lever	£2.33
44	3603450503	Lock Bolt	£4.01
45	3604651503	Compression Spring	£2.05
46	2610997191	Depth-gauge	£8.73
47	2600590006	Ratchet Cap	£1.00
48	3916060500	Spring Washer	£1.00
49	2910641122	Oval-head Screw	£2.05
50	1613480008	Wing Screw	£1.00
51	3603211501	Knob	£2.33
52	3600240500	Locking Ring	£4.19
53	3604648504	Extension Spring	£2.00	Not Available
54	2610915161	Screw	£2.33	Not Available
55	2916650003	Spring Retaining Ring	£1.00
57	3604613508	Compression Spring	£1.00	Not Available
58	3603120502	Guide Piece	£2.05
59	2610990698	Bellows	£7.25
61	1604477005	Blade Terminal	£2.33
62	3604680502	Retaining Snap Ring	£1.00
63	2910871122	Countersunk-head Screw	£0.00	Not Available
64	1617328025	Suppression Filter	£0.00	Not Available
81	2916540007	Locking Washer	£1.00
82	3603410504	Screw	£2.05
83	1903230007	Ball	£1.00
85	3600210507	O-ring	£1.00
89	2610996090	Set Ring	£1.00	Not Available
650/3	1907950511	Single-head Eng. Wrench	£7.98	Not Available
731	2608570101	Collet Chuck	£27.50
731	2608570102	Collet Chuck	£32.20
731	2608570100	Collet Chuck	£29.35
802	2610907795	Field	£28.57
804	2610907867	Fan Housing	£54.47
807	3605702581	Base Plate	£50.31
810	3601119779	Nameplate	£0.00	Not Available
818/4	3604652501	Spiral Spring	£3.03
818/3	3604321513	Carbon-brush Set	£9.45
818	3604336510	Brush Holder	£18.51
828	2610907864	Rod	£7.76
829	2610907865	Pointer	£7.01

Accessories for Bosch 0 601 614 050

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

This model also has 39 accessories available.

Scroll down to view them.

View both spares and accessories