Home Manufacturers Bosch Routers Router 1617 EVS 0 601 617 6A0

Bosch Router 1617 EVS Parts (0 601 617 6A0)

57 Compatible Accessories Available!

Enhance your Bosch 0 601 617 6A0 with our range of accessories

1 2610922584

Motor Housing

£27.69

2 1619P05316

Field

£41.02

3 1619P05216

Armature

£71.84

4 2610016525

On-off Switch

£6.12

5/3 3601352502

Terminal

£0.00

5/4 3601352501

Ring

£0.00

7 2601035001

Cable Clip

£1.00

9 2610915243

Nameplate

£0.00

13 3600905513

Deep-groove Ball Bearing

£8.73

14 3600905512

Deep-groove Ball Bearing

£4.05

21 2610009656

Insulating Sleeve

£7.01

22 1604477005

Blade Terminal

£2.33

29 2610993582

Nut

£3.60

31 2610941007

Rear Housing Section

£7.76

32 2610991375

Bearing Holder

£4.19

33 1900210115

O-ring

£2.33

34 2610941008

Set Of Handles

£6.12

35 1607233136

Speed Governor

£30.51

36 2610994107

Reference Plate

£2.51

61 2910611006

Tapping Screw

£2.29

62 2610991306

Tapping Screw

£1.00

74 2910641120

Oval-head Screw

£1.00

75 2610910566

Tapping Screw

£1.00

77 2910141166

Hex Socket Head Cap Screw

£1.00

150 2610992417

Single-head Eng. Wrench

£11.64

151 2610991388

Single-head Eng. Wrench

£5.91 Not Available

750 2610956672

Assembly

£0.00

750 2610018974

Collet

£37.23

750 2610001496

Assembly

£17.37

805 3604460560

Power Supply Cord

£0.00 Not Available

806 3600703512

Grommet

£2.39 Not Available

808 2610009639

Nameplate

£0.00

810 2610007957

Carbon-brush Set

£8.00

816 3604336506

Brush Holder

£11.37 Not Available

817 3604652501

Spiral Spring

£3.03

Ref	Part Number	Description	Price
1	2610922584	Motor Housing	£27.69
2	1619P05316	Field	£41.02
3	1619P05216	Armature	£71.84
4	2610016525	On-off Switch	£6.12
5/3	3601352502	Terminal	£0.00	Contact Us
5/4	3601352501	Ring	£0.00	Contact Us
7	2601035001	Cable Clip	£1.00
9	2610915243	Nameplate	£0.00	Contact Us
13	3600905513	Deep-groove Ball Bearing	£8.73
14	3600905512	Deep-groove Ball Bearing	£4.05
21	2610009656	Insulating Sleeve	£7.01
22	1604477005	Blade Terminal	£2.33
29	2610993582	Nut	£3.60
31	2610941007	Rear Housing Section	£7.76
32	2610991375	Bearing Holder	£4.19
33	1900210115	O-ring	£2.33
34	2610941008	Set Of Handles	£6.12
35	1607233136	Speed Governor	£30.51
36	2610994107	Reference Plate	£2.51
61	2910611006	Tapping Screw	£2.29
62	2610991306	Tapping Screw	£1.00
74	2910641120	Oval-head Screw	£1.00
75	2610910566	Tapping Screw	£1.00
77	2910141166	Hex Socket Head Cap Screw	£1.00
150	2610992417	Single-head Eng. Wrench	£11.64
151	2610991388	Single-head Eng. Wrench	£5.91	Not Available
750	2610956672	Assembly	£0.00	Contact Us
750	2610018974	Collet	£37.23
750	2610001496	Assembly	£17.37
805	3604460560	Power Supply Cord	£0.00	Not Available
806	3600703512	Grommet	£2.39	Not Available
808	2610009639	Nameplate	£0.00	Contact Us
810	2610007957	Carbon-brush Set	£8.00
816	3604336506	Brush Holder	£11.37	Not Available
817	3604652501	Spiral Spring	£3.03

Accessories for Bosch 0 601 617 6A0

Two flute cutter 3mm diameter - C001AX1/4TC

Solid carbide two flute cutter. 3.0mm diameter X 9.5mm cut for softwood, harwood, MDF, plywood and chipboard.

D=3 mm Cut length=3/8 inch Cut length=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 3.2mm diameter - C001BX1/4TC

Solid carbide two flute cutter. 3.2mm diameter X 12.7mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/8 inch D=3.2 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C007X1/4TC

Two flute cutter 6.3mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 6.3mm diameter - C008X1/4TC

Two flute cutter 6.3mm diameter X 25.4mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/4 inch D=6.3 mm Cut length=1 inch Cut length=25.4 mm Overall length=68.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 8.0mm diameter - C012AX1/4TC

Two flute cutter 8.0mm diameter X 25.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=8 mm Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 10mm diameter - C016X1/4TC

Two flute cutter 10mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=25/64 inch D=10 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019AX1/4TC

Microgranular tungsten tipped two flute Cutter 12.0mm diameter X 19.0mm cut for a perfect finish for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm C=19 mm C=3/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C019X1/4TC

Two flute cutter 12mm diameter X 19.1mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=3/4 inch Cut length=19.1 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C022X1/4TC

Two flute cutter 12.7mm diameter X 31.8mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=1 1/4 inch Cut length=31.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 15.0mm diameter - C024AX1/4TC

Two flute cutter 15.0mm diameter X 25mm cut for softwood, harwood, MDF, plywood and chipboard.

D=19/32 inch D=15 mm Cut length=63/64 inch Cut length=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 20.0mm diameter - C030AX1/4TC

Two flute cutter 20.0mm diameter X 20mm cut for softwood, harwood, MDF, plywood and chipboard.

D=20 mm Cut length=20 mm Shank Diameter=1/4 inch Includes:

View full description →

Dovetail cutter angle=104 degrees 12.7mm diameter - C041AX1/4TC

TCT dovetail cutter, 104 degrees X 12.7mm diameter X 12.7mm cut for timber, plywood, MDF, chipboard and abrasive plastics.

D=1/2 inch D=12.7 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=61 mm A=104 degrees Shank Diameter=1/4 inch Includes:

View full description →

Self guided chamfer angle=45 degrees x 12.7mm Cut - C049X1/4TC

Self guided chamfer cutter for straight and shaped material. Angle 45 degrees X 32.0mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings

D=32 mm C=1/2 inch C=12.7 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 6.3mm radius x 12.7mm cut - C076X1/4TC

Self guided rounding over cutter with 6.3mm radius X 25.4mm diameter X 12.7mm cut. Does not require a side fence, supplied with two bearings.

D=1 inch D=25.4 mm C=1/2 inch C=12.7 mm B=9.5 mm B2=12.7 mm R=6.3 mm R=1/4 inch Shank Diameter=1/4 inch Includes:

View full description →

Rounding over 9.5mm radius x 15.9mm cut - C078X1/4TC

Self guided rounding over cutter with 9.5mm radius X 31.7mm diameter X 15.9mm cut.

D=31.7 mm Cut length=5/8 inch Cut length=15.9 mm B=9.5 mm B2=12.7 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Self guided trimmer 12.7mm diameter - C116X1/4TC

Self guided trimmer 12.7mm diameter X 25.4mm cut for trimming plastic or plywood overlays.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm B=12.7 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Template profile 12.7mm diameter - C121X1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Biscuit jointer set - C152X1/2TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/2 inch Includes:

View full description →

Biscuit jointer set - C152X1/4TC

Two wing self-guiding TCT cutter ideal for biscuit jointing, 37.2mm diameter X 4.0mm cut. Three ball bearings supplied (12.7mm, 16.0mm and 19.0mm)

D=37.2 mm Cut length=4 mm B=12.7 mm B2=16.0 mm B3=19.0 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C153DX1/2TC

Two flute cutter 12.7mm diameter X 50.0mm with centre tip for plunge cutting in abrasive metals, softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C153X1/2TC

Two flute cutter 12.7mm diameter X 50.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 inches Cut length=50 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - C164X1/2TC

Two flute cutter 12.7mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=1/2 inch D=12.7 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided trimmer 6.35mm diameter x 25.4mm - C168X1/4TC

Guided trimmer 6.35mm diameter X 25.4mm cut for trimming pastic or plywood overlays.

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm B=6.35 mm A=90 degrees Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - C172X1/2TC

Two flute cutter 12.0mm diameter X 63.0mm cut for softwood, harwood, MDF, plywood and chipboard.

D=15/32 inch D=12 mm Cut length=2 1/2 inches Cut length=63 mm Shank Diameter=1/2 inch Includes:

View full description →

Aquamac 21 Recesser 54.5mm diameter - C207X1/2TC

Aquamac 21 Recesser 46.3 mm diameter. Comes complete with a guide bearing to reduce setting up time and simplify machining operations.

D=46.3 mm D2=34.3 mm C=10.3mm C2=2.7 mm B=28.6 mm OL=90 mm Shank Diameter=1/2 inch Includes:

View full description →

Intumescent cutter set 10mm x 40mm - C208X1/2TC

Neat cut intumescent cutter set, 40mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=40 mm C=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

View full description →

Intumescent cutter set 10mm x 24mm - C209X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 10mm cut for grooves on door frames for intumescent strips.

D=24 mm C=10 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 15mm x 24mm - C220X1/4TC

Neat cut intumescent cutter set, 24mm diameter X 15mm cut for grooves on door frames for intumescent strips.

D=24 mm C=15 mm B=16 mm E=4 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - TR17DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=93 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 12.7 diameter 12.7mm diameter - TR17X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 50.0mm cut.

D=1/2 inch D=12.7 mm C=50 mm OL=94 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - TR18DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 12.7mm diameter - TR18X1/2TC

Two flute cutter for a clean finish. 12.7mm diameter X 63.0mm cut.

D=1/2 inch D=12.7 mm C=63 mm OL=106 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 15.9mm diameter - TR19X1/4TC

Two flute cutter for a clean finish. 15.9mm diameter X 19.0mm cut.

D=5/8 inch D=15.9 mm C=19 mm OL=60 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 19.1mm diameter - TR20X1/4TC

Two flute cutter for a clean finish. 19.1mm diameter X 25.0mm cut.

D=3/4 inch D=19.1 mm C=25 mm OL=65.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Radius 5mm radius and 18mm diameter - TR21X1/4TC

Radius cutter for edge coves and fluting. 5.0mm radius X 18.0mm cut.

Cut length=18 mm R=5 mm Shank Diameter=1/4 inch Includes:

View full description →

Chamfer V groove cutter angle=45 degrees - TR22X1/4TC

Chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 12.7mm diameter.

D=1/2 inch D=12.7 mm Overall length=53 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.35mm x 12.7 - TR23X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 12.7mm cut

D=1/4 inch D=6.35 mm Cut length=1/2 inch Cut length=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 6.3mm diameter x 25.4 - TR24X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 6.35mm diameter X 25.4mm cut

D=1/4 inch D=6.35 mm Cut length=1 inch Cut length=25.4 mm Overall length=74.2 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 9.5mm diameter x 12.7 - TR25X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 9.5mm diameter X 12.7mm cut

D=3/8 inch D=9.5 mm Cut length=1/2 inch Cut length=12.7 mm Overall length=63 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm diameter x 25.4 - TR26X1/4TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=76.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer triple fluted 12.7X25.4 - TR27X1/4TC

Triple flutted bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 25.4mm cut

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided trimmer 12.7mm x50mm - TR28X1/2TC

Bearing guided trimmer, for trimming and bevelling timber, lipping and plastic laminate edges. 12.7mm diameter X 50.0mm cut

D=1/2 inch D=12.7 mm Cut length=50 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR29X1/4TC

Guided profiler for trimming and profiling timber and man made board. 12.7mm diameter X 25.4mm cut.

D=1/2 inch D=12.7 mm Cut length=1 inch Cut length=25.4 mm Overall length=70.8 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided profiler - TR30X1/2TC

Guided profiler for trimming and profiling timber and man made board. 19.1mm diameter X 50.0mm cut.

D=3/4 inch D=19.1 mm Cut length=50 mm Overall length=95 mm Shank Diameter=1/2 inch Includes:

View full description →

Guided ovolo round over cutter 6.35mm radius - TR31X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 25.4mm diameter, incudes 12.7mm bearing.

D=1 inch D=25.4 mm B=9.5 mm R=6.3 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided ovolo over 9.5mm radius - TR32X1/4TC

Bearing guided ovolo cutter, produces a smooth round over profile. 31.7mm diameter, incudes 12.7mm bearing.

D=31.7 mm B=9.5 mm R=9.5 mm Shank Diameter=1/4 inch Includes:

View full description →

Guided chamfer angle=45 degrees x 31.8mm - TR33X1/4TC

Bearing guided chamfer and V groove cutter, ideal for fast chamfering to remove edge on timber, or creating a decorative edge. 45 degrees X 31.8mm diameter.

D=1 1/4 inches D=31.8 mm Overall length=62 mm B=9.5 mm A=45 degrees Shank Diameter=1/4 inch Includes:

View full description →

Bearing guided rebater 12.7mm - TR34X1/2TC

Bearing guided rebater, includes 3 extra bearings (9.5mm, 15.9mm and 19.1mm)

D=35mm C=12.7mm Shank Diameter=1/2 inch Includes:

View full description →

Biscuit jointer set - TR35X1/2TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/2 inch Includes:

View full description →

Biscuit jointer set - TR35X1/4TC

Bearing guided biscuit jointer set. Enables biscuit jointing with timber, man made fibre and partical board. 37.2mm diameter X 4.0mm cut

D=29/64 inch D=37.2 mm Cut length=4 mm B=12.7 mm Shank Diameter=1/4 inch Includes:

View full description →

Two flute cutter 12mm diameter - TR37X1/2TC

Two flute cutter for a clean finish. 12.0mm diameter X 63.0mm cut.

D=12 mm C=54 mm OL=115 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/2TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm OL=63 mm Shank Diameter=1/2 inch Includes:

View full description →

Two flute cutter 15mm diameter - TR40DX1/4TC

Two flute cutter for a clean finish, TCT centre tip for drilling abrasive material. 15.0mm diameter X 25.0mm cut.

D=15 mm C=25 mm Shank Diameter=1/4 inch Includes:

View full description →

Intumescent cutter set 10mm x 40mm - TR41X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 10.0mm cut.

D=40 mm Cut length=10 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

View full description →

Intumescent cutter set 15mm x 40mm - TR42X1/2TC

Bearing guided intumescent recesser, 40.0mm diameter X 15.0mm cut.

D=40 mm Cut length=15 mm B=32 mm E=4 mm Shank Diameter=1/2 inch Includes:

View full description →

Router Cutter - C121BX1/4TC

Bearing guided template profile for rebating and trimming only. 12.7mm diameter X 9.5mm cut.

View full description →

Router Cutter - TR47X1/2TC

Bearing guided roman ogee, by raising the cutter the top is quickly removed. 25.4mm diameter.

View full description →